1) casting
[英]['kɑ:stɪŋ] [美]['kæstɪŋ]
铸坯件
1.
Manufacturing of cylinder-block casting for 465Q model automobile engine;
465Q汽车发动机缸体铸坯件的研制
2) casting rough
铸件毛坯
1.
It can provide important evidences to frock in cold machining, At the same time, the casting rough draft and craft draft could be exported.
利用三维实体造型软件的参数化设计思想,在UGNX环境中,通过对零件实体图的尺寸、结构、加工要求等信息的读取,经过二次开发程序的分析后,自动形成铸件的毛坯三维实体图,为在三维环境下的冷加工工装设计提供重要的依据,并能快捷地转换成铸件毛坯图和铸造工艺图。
4) bloom
[英][blu:m] [美][blum]
铸坯
1.
Effects of mold powder property on 12Mn2VB steel bloom surface quality;
结晶器保护渣性能对12Mn2VB钢连铸坯表面质量的影响
2.
Based on the research,it was found that center segregation especially carbon segregation in blooms was the major prob-lem.
通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题。
3.
In order to improve the quality of round blooms,based on technical parameters of round bloom continuous caster at Ma anshan Iron and Steel Co.
为提高圆坯质量,基于马钢圆坯连铸机技术特点,采用Gleeble2000热模拟试验机研究了代表钢种圆坯高温力学性能,通过理论分析和试验研究建立了二冷工艺模型,并分析了结晶器电磁搅拌参数对铸坯质量的影响。
5) Slab
[英][slæb] [美][slæb]
铸坯
1.
Effect of slab strain on Nb(C,N) precipitation in continuous casting process
连铸过程铸坯应变对碳氮化铌析出行为的影响
2.
Distribution of non-metallic inclusion quantity in 304 stainless steel slab
304不锈钢连铸坯中的非金属夹杂物数量分布
3.
Effect of cooling rate on the slab surface microstructure of microalloyed steel containing Nb and Ti
冷却速度对含铌、钛微合金钢铸坯表层组织结构的影响
6) casting slab
铸坯
1.
Effect of Casting Slab Defect on Cold Draw Quality of SWRH82B Steel Wire Coil;
铸坯缺陷对SWRH82B钢盘条冷拔质量的影响
2.
The internal quality of casting slab has been improved after optimization for M - EMS.
在铸坯凝固末端安装末端电磁搅拌(F-EMS),通过对末端电磁搅拌器性能参数的检测判定和冶金效果的初步测试并进行生产试验,确定了末端电磁搅拌的电磁工艺参数与搅拌方式。
3.
With the temperature decreasing of casting slab,V starts to precipitate with TiN as nucleation core or nucleate and grow up independently.
实验结果显示,在连铸初期,TiN基本全部从钢中析出,而随着铸坯温度的降低,V开始以TiN为核心或单独形核析出,在铸坯均热后,大部分单独形核的V(C,N)趋于溶解,未溶解的则开始长大,而以TiN为核心的(Ti,V)(C,N)中的V部分溶解于钢中,V在粒子中的含量减少。
补充资料：衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条