1) hot conditioning of slab
热铸坯
2) hot delivery and charging of continuous cast billet
连铸坯热送装
3) slab heating temperature
铸坯加热温度
1.
By means of X-ray pole density and three dimensional orientation distribution function(ODF)analysis,the mechanism of reduction of slab heating temperatures for Hi-B grain-oriented silicon steels by Mo has been studied.
采用 X 射线极密度及三维取向分布函数(ODF)方法,从织构的角度研究了在 Hi-B 取向硅钢中加入微量钼能够降低铸坯加热温度的机制。
2.
TEM observations were made of the influences of slab heating temperature and Mo on precipitated second phase particles(sulfide and AlN) in high induction grain-oriented silicon steels (Hi-B).
采用透射电镜观察了铸坯加热温度和Ｍｏ对高磁感取向硅钢（Ｈｉ－Ｂ钢）析出第二相质点（硫化物＋ＡｌＮ）的影响。
4) bloom
[英][blu:m] [美][blum]
铸坯
1.
Effects of mold powder property on 12Mn2VB steel bloom surface quality;
结晶器保护渣性能对12Mn2VB钢连铸坯表面质量的影响
2.
Based on the research,it was found that center segregation especially carbon segregation in blooms was the major prob-lem.
通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题。
3.
In order to improve the quality of round blooms,based on technical parameters of round bloom continuous caster at Ma anshan Iron and Steel Co.
为提高圆坯质量,基于马钢圆坯连铸机技术特点,采用Gleeble2000热模拟试验机研究了代表钢种圆坯高温力学性能,通过理论分析和试验研究建立了二冷工艺模型,并分析了结晶器电磁搅拌参数对铸坯质量的影响。
5) Slab
[英][slæb] [美][slæb]
铸坯
1.
Effect of slab strain on Nb(C,N) precipitation in continuous casting process
连铸过程铸坯应变对碳氮化铌析出行为的影响
2.
Distribution of non-metallic inclusion quantity in 304 stainless steel slab
304不锈钢连铸坯中的非金属夹杂物数量分布
3.
Effect of cooling rate on the slab surface microstructure of microalloyed steel containing Nb and Ti
冷却速度对含铌、钛微合金钢铸坯表层组织结构的影响
6) casting slab
铸坯
1.
Effect of Casting Slab Defect on Cold Draw Quality of SWRH82B Steel Wire Coil;
铸坯缺陷对SWRH82B钢盘条冷拔质量的影响
2.
The internal quality of casting slab has been improved after optimization for M - EMS.
在铸坯凝固末端安装末端电磁搅拌(F-EMS),通过对末端电磁搅拌器性能参数的检测判定和冶金效果的初步测试并进行生产试验,确定了末端电磁搅拌的电磁工艺参数与搅拌方式。
3.
With the temperature decreasing of casting slab,V starts to precipitate with TiN as nucleation core or nucleate and grow up independently.
实验结果显示,在连铸初期,TiN基本全部从钢中析出,而随着铸坯温度的降低,V开始以TiN为核心或单独形核析出,在铸坯均热后,大部分单独形核的V(C,N)趋于溶解,未溶解的则开始长大,而以TiN为核心的(Ti,V)(C,N)中的V部分溶解于钢中,V在粒子中的含量减少。
补充资料：衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条