1) continuous casting slab
连铸板坯
1.
Cause analysis and control measures of longitudinal cracks on the surface of continuous casting slabs;
连铸板坯表面纵裂纹原因分析及控制措施
2.
Study on the characteristics of central macrosegregation in moderate thickness continuous casting slabs;
中等厚度连铸板坯中心宏观偏析特性研究
3.
Study on intermedium cracks of continuous casting slab and improvement practice;
连铸板坯中间裂纹成因分析及改进实践
2) continuous cast slab
连铸板坯
1.
The method of on-line detecting for bulge of continuous cast slab;
连铸板坯外形的在线检测方法
2.
Based on the results of investigation on non metallic inclusions in continuous cast slab produced at pangang,non metallic inclusions situation in continuous cast slab of 09CuPRe B steel and their change during production were understood.
根据对攀钢连铸板坯中非金属夹杂物现状的调查，了解了０９ＣｕＰＲｅ＿Ｂ钢连铸坯中夹杂物的状况及在生产过程中的变化情况，得到的结果可作为攀钢生产洁净钢的依据。
3) continuously cast slab
连铸板坯
1.
Effect of electromagnetic stirring at secondary cooling area on central segregation of a continuously cast slab;
二冷区电磁搅拌对连铸板坯中心偏析的影响
2.
The plate samples with surface micro cracks rolled from continuously cast slab were investigated by microscopic examination,and it was found that there were three types of surface micro cracks,then on the corresponding pickled slabs.
对重钢连铸板坯轧制中厚板出现的表面微裂纹进行取样,经低倍检验发现,微裂纹有3种类型;与之对应的连铸板坯酸洗后发现,微裂纹也有3种类型,采用镀层结晶器铜板前以网状裂纹为主,尔后以横裂纹为主;对裂纹量最多的网状裂纹进行高倍和能谱检验,发现网状裂纹主要是铜裂纹。
3.
Through analyzing the actual production performance and macro data of continuously cast slab for heavy plate,the influencing factors on slab's triangular zone cracks were obtained.
通过对宝钢厚板连铸板坯生产实绩和低倍数据的分析,得到了板坯三角区裂纹的影响因素。
4) CC slab
连铸板坯
1.
This paper analyzes and compares the properties of carbon steel Q235 A and ship building steel B plates produced by hot charging and cold charging process from CC slab Cold bend and impact properties of plates produced by hot charging process are worse than that of plates produced by cold chargin
分析比较了Ｑ２３５－Ａ碳结钢及Ｂ级一般强度船板钢连铸板坯红坯“裸送”热装炉与冷装炉轧制成材的板材工艺与力学性能，热装炉工艺成材的冷弯及冲击性能明显低于后者。
2.
Based on the production practice at Jisteel, the reason of inner cracking in CC slab and influencing factors were discussed.
结合济钢连铸板坯生产实践,就连铸板坯内裂纹的产生原因和影响因素以及板坯内裂纹及其对钢板质量的影响进行了探讨,提出了减少铸坯内裂纹的相应技术措施。
5) slab
[英][slæb] [美][slæb]
连铸板坯
1.
Cleanliness of interstitial-free steel slabs produced in different casting stages;
不同浇铸阶段IF钢连铸板坯洁净度
2.
Study on the heat transfer model ofheat transfer process for continuous cast slabs;
连铸板坯热送过程传热模型研究
3.
Some defects have been found in the slab structure by comparison with normal slab in microstructure through microcosmic test.
中碳钢连铸板坯存在着在冷却、运输、二次切割、存放过程中不时出现批量低温状态开裂的现象。
6) slab continuous casting
板坯连铸
1.
Research and development of secondary cooling heat transfer model for Baosteel 1930 mm slab continuous casting;
宝钢1930mm板坯连铸二冷传热模型的研究与开发
2.
High availability(HA) realizing of dynamic soft reduction process control system for slab continuous casting machine;
板坯连铸机动态轻压下过程控制系统的高可用性实现
3.
Research on dynamic secondary cooling control model for slab continuous casting machine with high casting speed;
高拉速板坯连铸机动态二冷控制模型研究
补充资料：渤海铝业有限公司铝板坯连铸连轧机生产卷毛料
渤海铝业有限公司铝板坯连铸连轧机生产卷毛料
渤海铝业有限公司铝板坯连铸连轧机生产卷毛制
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条