1)  connecting plate
联接板
1.
Analyzed three kinds of technological plans for the connecting plate forming:single process, compound process and progressive.
分析了联接板的3种工艺方案,单工序、复合工序及连续工序,采用冲孔落料连续工艺,能提高工件的尺寸精度及生产率,降低生产成本。
2)  steel tower cross piece
铁塔联接板
1.
Study on steel tower cross piece punching NC system;
铁塔联接板冲孔数控系统的研制
3)  coupling
联接
1.
Taper Lock Bushes coupling is using the conical cuniform function to couple the axis and hub,which is applied in the coupling between axis and triangle pulley,flat pulley,synchronization gear,chain wheel,clutch.
锥套(Taper Lock Bushes)联接是利用锥面的楔形作用实现轴和轮毂的联接,它适用于三角带轮、平皮带轮、同步齿形带轮、链轮、联轴器等部件与轴之间的联接。
2.
The reasons of local liquid leakage and difficulty in overhauling of the dead trays in rectifying tower kettle for butadiene extraction were analyzed and the coupling and sealing structure of dead trays were redesigned.
分析了造成丁二烯萃取精馏塔塔釜死塔盘局部漏液和检修拆装困难的主要原因，重新设计出由卡板、螺栓和聚四氟乙烯混编盘根组成的死塔盘的联接与密封结构。
3.
As a result an optimum diesel engine exhaust pipe bolt coupling method was obtained.
为了解决排气管工作状态下因螺栓松动导致排气管漏气的问题,利用螺栓分析系统来测定螺栓扭矩-轴力关系及表面摩擦性能,并且通过对国内外不同材质的螺栓及垫片的试验结果分析,获得了最佳柴油机排气管螺栓的联接方案。
4)  connection
联接
1.
The practical measures to insure the strength of collar connection thread;
确保石油钻铤螺纹联接强度的使用措施
2.
Electrical locomotive transport, the connection between locomotive and car, and between two cars in Shanxi Coke - Coal Group Comp.
对山西焦煤集团公司电机车运输以及电机车与矿车、矿车与矿车之间的联接作了介绍,开通过在矿车上加装制动装置,来确保矿车在快速运输过程中的制动距离。
5)  join
联接
1.
Fixtureless join of scraper conveyor cable pan using in mechanize working face;
机械化工作面刮板输送机电缆槽无紧固件联接
2.
The join of hydraulic tractive shearer with electromotor crosswise arrangement;
电机横向布置液压牵引采煤机的联接
3.
With the help of an example of drawing elastic loop s join into in-phase Gear of Boots blowers,dynamic system software ADAMS is utilized to analyze its driving process.
以罗茨鼓风机同步齿轮端引入弹性环联接为例,利用系统动力学软件ADAMS,对其传动过程进行动力学分析,得到了在引入弹性环联接后摩擦力变化曲线,弹性环安装精度对弹性环联接可靠性影响等有益弹性环应用的结论。
6)  joint
联接
1.
High strength bolt-joint has been a new type of steel structure joint.
高强度螺栓副是一种钢结构新型联接，转矩系数是它的一项重要指标，也是施工中的主要参数，为此，对它进行了试验与研究，已取得了一些初步成果
2.
This paper deduces the calculation method and formula of bearing capacity of interference fit joint in plastic deformation according to the plastic theory and sets out the detailed calculating steps for computer programming.
根据塑性理论推导出在塑性变形状态下过盈配合联接承载能力的计算方法和计算公式。
参考词条
补充资料：凹板印刷机用胶布板
分子式：
分子量：
CAS号：

性质：用于高速轮转凹版印刷机的胶布板。供印刷报纸、杂志、图书等。与凸版印刷机用胶布板的装置位置相同，不与油墨直接接触，但作用不同，通过橡皮表层的弹力作用，将凹沟内的油墨吸到纸张上。印刷时所受的压力较大，胶层须较厚。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。