1) flexible coupling
柔性联接
1.
Bushing is one kind of the elastic couplings made of rubber and metal with the function of flexible coupling and reducing vibration,So the bushing can widely used in the position which need flexible couple and can have the function to reduce vibration and decrease noise.
橡胶关节是一类橡胶和金属件复合而成的弹性连接体,具有柔性联接和缓冲振动冲击的作用,所以广泛应用于柔性联接位置,起到减振降噪的作用。
2) flexibility
柔性
1.
Improvement on flexibility of water-reusing system with multi-contaminants through changing network structure;
通过改进网络结构提高多杂质水系统柔性的集成方法
2.
Virtual Part-A New Concept for Increasing Productivity and Flexibility of Flexible Machines;
“虚工件”法——提高柔性制造设备生产率和柔性的一种新方法
3) flexible
柔性
1.
Studies on flexible unsaturated polyester resin from polyether glycol and its flexible curing system;
聚醚二元醇不饱和聚酯树脂及其柔性固化体系
2.
A flexible reforming of plant for the food additive sodium phosphate production;
食品添加剂磷酸钠盐装置的柔性化改造
3.
GMAW flexible accommodation for closed round bead with torches;
封闭焊缝多焊炬GMAW焊机的柔性化控制
4) flexibleness
柔性
1.
It points out the importance that the traditional modular machine-tool and its production line have the flexibleness.
论述了柔性生产线的特点及发展趋势,介绍了数控组合机床的基本组成及常见的形式,指出了使传统的组合机床及其自动线具有柔性的重要意义。
2.
In the field of machine control, the conception of flexibleness and openness are very similar.
对数控系统的“柔性”与“开放性”的概念分别作了深入的分析,明确了“柔性”与“开放性”这两个不同概念之间的相互关系。
3.
Theory and methodology of mechanism dynamical reliability analysis considered the influence of friction and flexibleness were presented.
提出了摩擦和柔性影响下的机构动态可靠性分析的理论和方法,给出了柔性机构动态可靠性分析的广义模型。
5) suppleness
柔性
1.
Suppleness Technology of Workflow Management System;
工作流管理系统的柔性技术
2.
It also introduces construction methods of the steel framed HDPE pipe that has a suppleness characteristic of expansion with heat and contracts with cold,this laying a foundation for the application of steel framed HDPE pipe widely used in Various fields in future.
对钢骨架塑料复合管在东海大桥给水工程中的应用进行了系统研究,介绍了钢骨架塑料复合管在工程使用中的各种施工控制措施,并针对钢骨架塑料复合管自身热胀冷缩、柔性特点在使用过程中的控制措施做了详细介绍,为今后钢骨架塑料复合管在各种领域中更加广泛的应用奠定了基础。
3.
Therefore, granting grace period must be limited on some special occasions, so that we could strengthen rigidity and weaken suppleness of law in execution procedure.
必须将执行宽限严格控制在少数特殊情况之下 ,以张扬强制执行法刚性的一面 ,弱化其柔性的一面。
6) flexible rolling
柔性辊轧
1.
The research on the process of flexible rolling for shaft forgings and experiment;
轴类件的柔性辊轧成形工艺与实验研究
2.
The flexible rolling process is suitable for forming of the step shaft forgings,with the advantages such as short development period,lower cost and high flexibility.
柔性辊轧成形轴类零件具有周期短、成本低、高柔性的特点,但中心材料容易产生疏松或孔腔等损伤缺陷。
参考词条
补充资料：弹性环联接
由两个内外锥面配合的弹性环挤紧在轴与孔之间所构成的可拆联接（见图）。弹性环的锥角一般为12.5°～17°。拧紧螺母可使内外环互相挤紧，轴、孔与环之间产生径向压力，工作时靠相伴而生的摩擦力来传递扭矩和轴向力。弹性环一般用中、高碳钢或铬钢制成，要求表面精加工和配合良好。联接的定心精度要求很高时，宜用整环。弹性环联接承载能力高,没有应力集中源，定心性好，装拆方便,有足够的紧密性，过载时出现的打滑现象对联接还有保护作用。由于弹性环要占一定的空间且需要螺纹联接以产生预紧力，应用有时受到构造上的限制。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。