1) connection graph
联接图
1.
This paper gives the definition of subassembly, and presents a space partition technique using octree to get connection graph and local blocking graph.
给出了子装配体的定义,提出使用八叉树分割空间来获得联接图和局部阻碍图的方法。
2) part couple graph
零件联接图
1.
Therefore assembly-feature could sim plify part couple graph in order to reduce space of assembly cut-set.
通过对面集的判断，可以方便的确定两零 件能否直接装配，实现了简化零件联接图，以达到减少割集的求解空间，并用装配特征进行 零件可装配性判别，使判别方便简单。
3) collaborative linkage map(CLM)
活动状态联接图
1.
It introduces a new modeling method, which uses Multi-context Map(MCM) and Collaborative Linkage Map(CLM) for collaboration task.
协同工作关联图(MCM)和活动状态联接图(CLM)是协同工作过程建模新方法。
4) coupling
联接
1.
Taper Lock Bushes coupling is using the conical cuniform function to couple the axis and hub,which is applied in the coupling between axis and triangle pulley,flat pulley,synchronization gear,chain wheel,clutch.
锥套(Taper Lock Bushes)联接是利用锥面的楔形作用实现轴和轮毂的联接,它适用于三角带轮、平皮带轮、同步齿形带轮、链轮、联轴器等部件与轴之间的联接。
2.
The reasons of local liquid leakage and difficulty in overhauling of the dead trays in rectifying tower kettle for butadiene extraction were analyzed and the coupling and sealing structure of dead trays were redesigned.
分析了造成丁二烯萃取精馏塔塔釜死塔盘局部漏液和检修拆装困难的主要原因，重新设计出由卡板、螺栓和聚四氟乙烯混编盘根组成的死塔盘的联接与密封结构。
3.
As a result an optimum diesel engine exhaust pipe bolt coupling method was obtained.
为了解决排气管工作状态下因螺栓松动导致排气管漏气的问题,利用螺栓分析系统来测定螺栓扭矩-轴力关系及表面摩擦性能,并且通过对国内外不同材质的螺栓及垫片的试验结果分析,获得了最佳柴油机排气管螺栓的联接方案。
5) connection
联接
1.
The practical measures to insure the strength of collar connection thread;
确保石油钻铤螺纹联接强度的使用措施
2.
Electrical locomotive transport, the connection between locomotive and car, and between two cars in Shanxi Coke - Coal Group Comp.
对山西焦煤集团公司电机车运输以及电机车与矿车、矿车与矿车之间的联接作了介绍,开通过在矿车上加装制动装置,来确保矿车在快速运输过程中的制动距离。
6) join
联接
1.
Fixtureless join of scraper conveyor cable pan using in mechanize working face;
机械化工作面刮板输送机电缆槽无紧固件联接
2.
The join of hydraulic tractive shearer with electromotor crosswise arrangement;
电机横向布置液压牵引采煤机的联接
3.
With the help of an example of drawing elastic loop s join into in-phase Gear of Boots blowers,dynamic system software ADAMS is utilized to analyze its driving process.
以罗茨鼓风机同步齿轮端引入弹性环联接为例,利用系统动力学软件ADAMS,对其传动过程进行动力学分析,得到了在引入弹性环联接后摩擦力变化曲线,弹性环安装精度对弹性环联接可靠性影响等有益弹性环应用的结论。
参考词条
补充资料：图的减缩图(或称图子式)
图的减缩图(或称图子式)
minor of a graph
图的减缩图(或称图子式)【.皿以ofa脚户;MHHoPrpa中a」【补注】设G是一个图(graph)(可以有环及多重边).G的一个减缩图(nullor)是从G中接连进行下述运算而得的任何一个图: i)删去一条边; 五)收缩一条边; 说)去掉一个孤立顶点. NRobe由on与P.D.Se脚aour的图减缩定理(脚Ph nl的。r theon习11)如下所述:已知有限图的无穷序列G，，GZ，…，则存在指标i
说明：补充资料仅用于学习参考，请勿用于其它任何用途。