1) super duplex steel
超级双相钢
2) super duplex stainless steel
超级双相不锈钢
1.
The tensile properties at 900-1300℃,as well as the deformed microstructure of the as-forged 00Cr25Ni7Mo4N super duplex stainless steel(SDSS)have been studied by thermo-mechanical simulator.
用Gleeble-3800热变形模拟试验机研究了锻态00Cr25Ni7Mo4N超级双相不锈钢在900~1300℃时的高温拉伸塑性和高温变形组织特征。
2.
The effect of the heat treatment on the dual phase scale and corrosion property of the super duplex stainless steel 00Cr25Ni7MoN have been introduced in this article.
本文介绍了热处理工艺对超级双相不锈钢00Cr25N i7Mo4N中两相的比例有影响,进而对该钢的耐腐蚀性能也造成影响的试验分析情况。
3.
The influence of rare earths on solidification structure of 00Cr25Ni7Mo4N super duplex stainless steel was studied.
研究了Ce对00Cr25Ni7Mo4N超级双相不锈钢凝固组织的影响,结果表明,随着钢中Ce含量的增加,其凝固组织中等轴晶线性比相应明显增加,Ce含量为0%,0。
3) Super Duplex Stainless Steel 00Cr25Ni7Mo4N
超级双相不锈钢00Cr25Ni7Mo4N
1.
Influence of Solution Temperature on Structure and Properties of Super Duplex Stainless Steel 00Cr25Ni7Mo4N;
固溶温度对超级双相不锈钢00Cr25Ni7Mo4N组织和性能的影响
4) cast super duplex stainless steel
铸造超级双相不锈钢
1.
In this paper,the effects of aging treatments on the type,size and quantity of precipitation particles of a cast super duplex stainless steel after solution treatment were studied by means of OM,SEM,XRD and TEM.
对固溶处理后的铸造超级双相不锈钢材料进行时效处理,利用OM,SEM,XRD和TEM分析了时效温度对析出相的影响。
6) Super Duplex Stainless Steel S32750
超级双相不锈钢S32750
1.
Influence of Solution Temperature on Structure and Corrosion Resistance of Plate of Super Duplex Stainless Steel S32750
固溶温度对超级双相不锈钢S32750板材组织和耐蚀性的影响
补充资料:双相钢
分子式:
CAS号:
性质:又称复相钢。由马氏体或奥氏体与铁素体基体两相组织构成的钢。一般将铁素体与奥氏体相组织组成的钢称为双相不锈钢,将铁素体与马氏体相组织组成的钢称为双相钢。双相钢是低碳钢或低合金高强度钢经临界区热处理或控制轧制后而获得。典型的双相钢屈服强度σs为310MPa,拉伸强度σb为655MPa。双相钢用于制造冷冲、深拉成型的复杂构件,也可用作管线钢、链条、冷拔钢丝、预应力钢筋等。
CAS号:
性质:又称复相钢。由马氏体或奥氏体与铁素体基体两相组织构成的钢。一般将铁素体与奥氏体相组织组成的钢称为双相不锈钢,将铁素体与马氏体相组织组成的钢称为双相钢。双相钢是低碳钢或低合金高强度钢经临界区热处理或控制轧制后而获得。典型的双相钢屈服强度σs为310MPa,拉伸强度σb为655MPa。双相钢用于制造冷冲、深拉成型的复杂构件,也可用作管线钢、链条、冷拔钢丝、预应力钢筋等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条