1) finishing mill guide
精轧导卫
2) continuous rolling guide
连轧导卫
3) roll fittings
轧辊导卫装置
4) finishing roll
精轧轧辊
5) finish rolling
精轧
1.
In order to make better numerical simulation result in finish rolling and get more reasonable rolling parameters, the process of finish rolling was simulated with updated geometry method of LS-DYNA.
为了更好的对精轧过程进行数值模拟,提供更为合理的轧制参数,以LS-DYNA软件中的单元更新方法模拟了精轧过程。
2.
By using finishing temperature calculation software,the temperature variation of strip steel during finish rolling was researched.
用带钢热连轧精轧温度控制模拟软件,系统地研究了负荷分配对带钢精轧轧制过程中变形温升、水冷温降以及精轧出口温度的影响,并总结出了相应的规律,为建立高精度热连轧带钢温度控制模型提供了理论依据。
3.
Based on the characterization of microstructure at surface flaking in Cu-Fe-P lead frame copper alloy of finish rolling, the stress and strain distributions of the interface between Cu matrix and Fe particle was analyzed using plane strain model by elastoplastic finite element method.
运用弹塑性有限元方法的平面应变分析模型,依据引线框架 Cu- Fe- P合金精轧后表面起皮剥落处的显微组织特征,研究了 Cu基体和 Fe相颗粒界面附近的应力应变场分布。
6) finishing rolling
精轧
1.
Base on the plate finishing rolling process, the temperature predition model of the plate was developed by consideration of the influence of radiation, convection, highpressure water descaling, roll conductivity and deformation energy.
从设定模型角度结合中厚板精轧过程的工艺特点,分析了热辐射和对流、高压水除鳞、轧辊的热传导和塑性功对钢板温度变化的影响,得出如下结果:①钢板热辐射和对流过程可以简化成一维热传导方程,钢板的黑度可考虑成钢板厚度的函数;②高压水除鳞过程可以简化成半无限体平板的瞬态热传导模型;③轧辊的热传导过程可简化成两个半无限体之间的热传导过程,接触热阻的影响通过修正系数进行调节;④塑性功造成的温度变化必须考虑热功转化效率的影响·通过与实际数据的比较可以看出该模型具有很好的预测精度
2.
, the calculative model of material plastic coefficient m, the calculative compensation model of loops, time interval of system control and the measurement of pressingdown position in the finishing rolling AGC program pack are developed, optimized and improved.
在武钢热轧带钢厂的更新改造中，对精轧ＡＧＣ程序包中材料塑性系数ｍ值的计算模型、活套计算补偿模型以及系统控制的时间间隔、压下位置测量等进行了开发、优化与完善，使带钢的厚度精度明显提高。
补充资料：骁卫
1.古代武官名。汉有骁卫将军，东汉改为骁骑。晋领营兵，兼统宿卫。南朝梁置左右骁骑。隋改置左右骁卫府，为禁卫军之一。唐宋因之，而去"府"字，设上将军﹑大将军﹑将军等官。金元皆无。参阅《通典．职官十》﹑《续通典．职官十》。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条