1) titanium alloy Gr12
Gr12钛合金
1.
The picking process of the super long titanium alloy Gr12 tube was performed by using three kinds of pickle with different compositons.
研究Gr12钛合金特长管的酸洗工艺。
2) titanium and its alloys
钛和钛合金
1.
The barriers were prospected to be used in titanium and its alloys as protective coatings.
概述了防止氢和氢同位素渗透壁垒层的研究进展,展望了这些壁垒层在钛和钛合金基体上的应用前景。
3) titanium and its alloys
钛及钛合金
1.
A simultaneous determination of oxygen and hydrogen in titanium and its alloys on infrared absorption has been described,and the optimal conditions have been obtained.
叙述了用红外吸收法对钛及钛合金中氧和氢联合测定的方法,取得了测定的最佳条件。
2.
Anodizing coloring mechanism of titanium and its alloys was analyzed to make sure the relationship of fiun thickness and coloring power source, so that the technological method and current design parameters were deduced to keep the color consistence of bath production, which provided an available method for coloring of titanium and its alloys.
分析了钛及钛合金阳极氧化着色机理及色膜厚度与氧化着色电源之间的关系,得出了保证成批量着色颜色一致性的工艺方法及电流设计参数,为钛及钛合金着色的应用提供了一种可用的方法。
3.
However, the production and utilization of titanium and its alloys are limited for their high chemical activity at molten state.
钛及钛合金具有密度小、强度高、耐腐蚀等一系列优点,在航空航天、国防军事、民用轻工等领域均有广泛应用前景。
4) Ti and its alloy
钛及钛合金
1.
The determination of Zr, Ru, Pd, Hf, Cu, Y, V, Mo, Nb, Al, Co, Ni, Ta, Bi, Sn, Cr and Mn in Ti and its alloys have been studied using an atomic emisson spectrum spectroscopy.
采用发射光谱分析技术,研究了钛及钛合金中Zr,Ru,Pd,Hf,Cu,Y,V,Mo,Nb,Al,Co,Ni,Ta,Bi,Sn,Cr,Mn的光谱测定方法。
5) titanium and titanium alloy
钛及钛合金
1.
Discussion about specified residual elongation stress in the standard of titanium and titanium alloy;
钛及钛合金标准中规定残余伸长应力的探讨
2.
Preparation of metallographic specimen for titanium and titanium alloy used for surgical implants
外科植入物用钛及钛合金金相试样制作浅谈
3.
The paper introduces the possibility of application of the titanium and titanium alloy for wrought products of motorcar.
介绍了汽车中使用钛及钛合金各类加工材的可能性。
6) titanium and its alloy
钛及钛合金
1.
As the markets of aerospace for the thick titanium and its alloy plate are more and more of the increase,it is impossible to meet the requirements of aerospace industry for the traditional blaze incision,so the experiments of waterjet process for cutting thick titanium and its alloy plate were performed.
随着世界航空市场趋好,钛及钛合金中厚板的需求旺盛,采用传统的火焰切割方式切割钛及钛合金已无法满足航空工业的需求。
2.
The utilization factor of materials for powder metallurgy parts can reach 100%,it is the important way to reduce the production cost of titanium and its alloy parts.
钛及钛合金具有优良的综合力学性能,在航空航天、航海、化工等领域得到日益广泛的应用。
3.
To meet the demands of welding titanium and its alloy electrode in large size.
为了满足大尺寸钛及钛合金电极的焊接要求,宝钛集团有限公司依据等离子弧的压缩效应原理及电弧的稳定性原理,对从德国引进的钛及钛合金真空等离子焊箱枪体的阴极和喷嘴进行了技术改造。
补充资料：Tracid cyanine GR
分子式：C33H23N5Na2O6S2
分子量：695.690
CAS号：3529-01-9
性质：深紫棕色粉末。溶于水呈紫色，溶于酒精呈深蓝色。遇浓硫酸呈暗深蓝色，稀释后呈绿光蓝色。它的水溶液加浓盐酸生成暗蓝色沉淀，加浓氢氧化钠溶液呈酱红色。染色时遇铜，铁离子时，色泽稍暗，遇铬离子影响很小。拔染性差。
制备方法：间氨基苯磺酸第一次重氮化，与甲萘胺盐酸盐偶合，生成的单偶氮化合物再第二重氮化，再与对甲苯基周位酸第二次偶合，中和，盐析而得。该产品的工艺过程与弱酸性深蓝5R相似。间氨基苯磺酸(100%) 239 硫酸(100%) 337甲萘胺 202 氢氧化钠(100%) 1100对甲基周位酸(100%) 423 乙酸钠 352盐酸(31%) 600 食盐碱地 4500
用途：主要用于羊毛，锦纶和丝绸织物的染色。还可与直接染料同浴染毛/粘混纺织物。也可用于皮革、纸张的染色和生物着色。
分子量：695.690
CAS号：3529-01-9
性质：深紫棕色粉末。溶于水呈紫色，溶于酒精呈深蓝色。遇浓硫酸呈暗深蓝色，稀释后呈绿光蓝色。它的水溶液加浓盐酸生成暗蓝色沉淀，加浓氢氧化钠溶液呈酱红色。染色时遇铜，铁离子时，色泽稍暗，遇铬离子影响很小。拔染性差。
制备方法：间氨基苯磺酸第一次重氮化，与甲萘胺盐酸盐偶合，生成的单偶氮化合物再第二重氮化，再与对甲苯基周位酸第二次偶合，中和，盐析而得。该产品的工艺过程与弱酸性深蓝5R相似。间氨基苯磺酸(100%) 239 硫酸(100%) 337甲萘胺 202 氢氧化钠(100%) 1100对甲基周位酸(100%) 423 乙酸钠 352盐酸(31%) 600 食盐碱地 4500
用途：主要用于羊毛，锦纶和丝绸织物的染色。还可与直接染料同浴染毛/粘混纺织物。也可用于皮革、纸张的染色和生物着色。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条