1) TA6V titanium alloy
TA6V钛合金
1.
Fatigue analysis for the SENT specimen of TA6V titanium alloy based on ANSYS
基于ANSYS的TA6V钛合金SENT试样疲劳分析
2.
On the base of the fatigue small cracks growth test in TA6V titanium alloy,the fatigue fracture of TA6V titanium alloy SENT specimen is analyzed.
在进行TA6V钛合金疲劳小裂纹实验的基础上,使用KYKY2800B型扫描电镜(SEM)对TA6V钛合金疲劳断口形貌进行疲劳源区及其裂纹扩展形状、扩展区、瞬断区形貌的观察,分析TA6V钛合金疲劳断口形貌形成的原因,为其结构疲劳安全设计及可靠性分析提供科学依据,为今后TA6V钛合金在我国的使用提供参考。
3.
Firstly, in the paper, according to aerial standard HB7705-2001 "Standard test method for fatigue small crack growth rates of metallic materials", the test of fatigue small cracks growth has been made in the single-edge-notch tension (SENT) specimen of TA6V titanium alloy by applying the replica methods.
本文首先根据航空标准HB7705-2001《金属材料疲劳小裂纹扩展速率试验方法》，采用复型法对TA6V钛合金SENT试样进行疲劳小裂纹试验，根据试验结果分析TA6V钛合金在应力比R=-1和R=0时不同应力水平下的疲劳小裂纹扩展规律。
2) titanium and its alloys
钛和钛合金
1.
The barriers were prospected to be used in titanium and its alloys as protective coatings.
概述了防止氢和氢同位素渗透壁垒层的研究进展,展望了这些壁垒层在钛和钛合金基体上的应用前景。
3) titanium and its alloys
钛及钛合金
1.
A simultaneous determination of oxygen and hydrogen in titanium and its alloys on infrared absorption has been described,and the optimal conditions have been obtained.
叙述了用红外吸收法对钛及钛合金中氧和氢联合测定的方法,取得了测定的最佳条件。
2.
Anodizing coloring mechanism of titanium and its alloys was analyzed to make sure the relationship of fiun thickness and coloring power source, so that the technological method and current design parameters were deduced to keep the color consistence of bath production, which provided an available method for coloring of titanium and its alloys.
分析了钛及钛合金阳极氧化着色机理及色膜厚度与氧化着色电源之间的关系,得出了保证成批量着色颜色一致性的工艺方法及电流设计参数,为钛及钛合金着色的应用提供了一种可用的方法。
3.
However, the production and utilization of titanium and its alloys are limited for their high chemical activity at molten state.
钛及钛合金具有密度小、强度高、耐腐蚀等一系列优点,在航空航天、国防军事、民用轻工等领域均有广泛应用前景。
4) Ti and its alloy
钛及钛合金
1.
The determination of Zr, Ru, Pd, Hf, Cu, Y, V, Mo, Nb, Al, Co, Ni, Ta, Bi, Sn, Cr and Mn in Ti and its alloys have been studied using an atomic emisson spectrum spectroscopy.
采用发射光谱分析技术,研究了钛及钛合金中Zr,Ru,Pd,Hf,Cu,Y,V,Mo,Nb,Al,Co,Ni,Ta,Bi,Sn,Cr,Mn的光谱测定方法。
5) titanium and titanium alloy
钛及钛合金
1.
Discussion about specified residual elongation stress in the standard of titanium and titanium alloy;
钛及钛合金标准中规定残余伸长应力的探讨
2.
Preparation of metallographic specimen for titanium and titanium alloy used for surgical implants
外科植入物用钛及钛合金金相试样制作浅谈
3.
The paper introduces the possibility of application of the titanium and titanium alloy for wrought products of motorcar.
介绍了汽车中使用钛及钛合金各类加工材的可能性。
6) titanium and its alloy
钛及钛合金
1.
As the markets of aerospace for the thick titanium and its alloy plate are more and more of the increase,it is impossible to meet the requirements of aerospace industry for the traditional blaze incision,so the experiments of waterjet process for cutting thick titanium and its alloy plate were performed.
随着世界航空市场趋好,钛及钛合金中厚板的需求旺盛,采用传统的火焰切割方式切割钛及钛合金已无法满足航空工业的需求。
2.
The utilization factor of materials for powder metallurgy parts can reach 100%,it is the important way to reduce the production cost of titanium and its alloy parts.
钛及钛合金具有优良的综合力学性能,在航空航天、航海、化工等领域得到日益广泛的应用。
3.
To meet the demands of welding titanium and its alloy electrode in large size.
为了满足大尺寸钛及钛合金电极的焊接要求,宝钛集团有限公司依据等离子弧的压缩效应原理及电弧的稳定性原理,对从德国引进的钛及钛合金真空等离子焊箱枪体的阴极和喷嘴进行了技术改造。
补充资料：钼钛合金
分子式：
CAS号：
性质：由钼和钛所组成的合金，最著名的为Mo-0.5Ti合金。大部分的钼钛合金采用粉末混合、压制、烧结制成合金锭，再加工成材。其工艺简单，成品率高。钼钛合金具有比纯钼高的高温强度和再结晶温度，提高了使用性能和寿命。主要用以替代纯钼作为高温炉的加热元件和器件，电子管的支架、栅极以及航天航空工业中的高温结构部件等。
CAS号：
性质：由钼和钛所组成的合金，最著名的为Mo-0.5Ti合金。大部分的钼钛合金采用粉末混合、压制、烧结制成合金锭，再加工成材。其工艺简单，成品率高。钼钛合金具有比纯钼高的高温强度和再结晶温度，提高了使用性能和寿命。主要用以替代纯钼作为高温炉的加热元件和器件，电子管的支架、栅极以及航天航空工业中的高温结构部件等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条