1.
By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established.
在工业生産条件下测量了铸坯加热温度分布，工业试验确定了加热炉经济负荷运行区。
2.
Analysis of the Temperature of Slabs out of CCM in HCR Technology
热送热装工艺中板坯出连铸机温度的分折
3.
Numerical Simulation of Slab Temperature Field During Reheating and Its Application
热轧板坯加热温度场数值模拟及应用
4.
Heat transfer analysis and temperature field simulation for square/round billet continuous casting moulds
方圆坯连铸结晶器传热分析及温度场仿真研究
5.
Study on Temperature Changing Regularity of Slab in CC-HR Region
连铸-热轧区段大板坯温度变化规律研究
6.
Study on Billet Heating Temperature of Φ35 m Rotary Hearth Furnace
Φ35m环形炉管坯加热温度的研究
7.
Heating Temperature Measurement of Slab Rotary Furnace in BTCO
包钢环形炉管坯加热温度测试和研究
8.
Effect of the Heat Treatment on the Microstructure and Mechanical Properties of 316L
加热制度对316L铸坯微观组织和力学性能的影响
9.
Numerical Simulation of Mould/billet Temperature and Concentration Field in the Continuous Casting of Round Billet;
圆坯连铸结晶器/铸坯温度场与浓度场数值模拟
10.
ANALYSIS OF THE FACTORS AFFECTING THE TEMPERATURE OF SLAB OUT OF CCM DURING HOT DELIVERY AND CHARGING PROCESS
热送热装工艺中板坯出连铸机温度的影响因素分析
11.
The Simulation of Temperature for Continuously Casting Slabs during Hot Steel Rolling and Designed of the Industry Software;
连铸方坯热送直轧温度场的计算机仿真及工业软件开发
12.
Study on Heat Transfer and Temperature Field of Mold for 40Cr Steel Tube Billet Horizontal Continuous Casting
应用Fluent对40Cr管坯水平连铸过程中温度场及传热的研究
13.
Study on the Temperature and Stress State of Thin Slab in Continuous Casting;
薄板连铸坯的温度与应力状态的研究
14.
In this paper the on-line real-time detecting system of molder surface temperature of continuous casting is designed.
设计了连铸铸坯表面温度在线实时测量系统。
15.
Influence of slab reheating temperature on inhibitors and magnetic properties of grain-oriented electrical steel produced by low slab reheating temperature techniques
板坯加热温度对低温技术取向电工钢抑制剂与磁性的影响
16.
The BP Neural Network Model of Thermal Parameters and Application in Billet Heating Prediction;
热物性参数BP网络模型及其在钢坯加热温度预报中的应用
17.
Effect of Slab Reheating Temperature on Hot Rolling and Cold Rolling Texture of Grain Oriented Silicon Steel Sheet
取向硅钢板坯加热温度对热轧及冷轧板织构的影响
18.
The sizes of slabs, the casting speeds of CCM and the cooling methods in second cooling zone are key factors which affecting the temperature of slabs out of CCM.
影响铸坯出连铸机温度的主要因素是铸坯尺寸、连铸机拉迪和冷却制度。