1) Water accessibility experience
亲水体验
2) hydrophilic colloids
亲水胶体
1.
Effect of hydrophilic colloids on storage stability and sensory quality of defatted yoghurt;
亲水胶体对脱脂发酵乳储存稳定性和感官品质的影响
2.
The properties of several hydrophilic colloids were compared and two of them were chosen to form a complex, which made of the jelly sweets with a transparent, soft and elastic texture.
采用广东阳春春砂仁的提取浓缩物为原料,选择并比较了几种亲水胶体的凝胶性能及形成凝胶软糖的工艺条件。
3) hydrophilic monomer
亲水单体
1.
As a hydrophilic monomer in WPU synthesis,further study on the oligomers of polyether and polyester with sulphonate group was worthy.
小分子磺酸盐熔点高、脂溶性小,仅N-(2-氨基乙基)-氨基乙烷磺酸钠(AAS)在实际生产中得到应用,含磺酸盐基团的聚醚和聚酯低聚物作为WPU合成的亲水单体值得深入研究。
2.
Cross-linked Copolymer gels were successfully prepared by copolymerization of long alkyl chain acrylic ester (hexadecyl acrylate(HA), octadecyl acrylate(ODA),) and hydrophilic monomer (acrylic acid(AA), methacrylic acid(MAA), 2-hydroxy-ethyl ester(HEA)) , using absolute ethanol as a solvent, N,N' -methylene-bis-acrylamide (MBAA) as a cross-linking agent at 50@.
合成了丙烯酸长链酯(丙烯酸十六酯(HA)、丙烯酸十八酯(ODA))与亲水单体(丙烯酸(AA)、甲基丙烯酸(MAA)、丙烯酸羟乙酯(HEA))的共聚物凝胶，研究了共聚组成对共聚物凝胶性能的影响。
3.
The water-borne technology for polyester is reviewed with using different hydrophilic monomers, including trimellitic anhydride, dimethylmalonic acid, UV curable hyperbranched waterborne polyester, as well as sulphonate monomer.
综述了4种含有不同亲水单体的聚酯水性化技术,包括传统型的以偏苯三酸酐为亲水性单体的水性聚酯、二羟甲基丙酸为亲水性单体的水性聚酯、紫外固化超支化水性聚酯以及磺酸盐型单体的水性聚酯。
4) hydrocolloids
亲水胶体
1.
Application of hydrocolloids on stabilizing banana juice;
亲水胶体在稳定香蕉饮料中的应用
2.
On Hydrocolloids and Its Complex Gums Used in Meat Products;
亲水胶体及其复配胶在肉制品中应用的研究进展
3.
Effect of Hydrocolloids on the Gel Properties of Horse-mackerel Surimi
亲水胶体对竹荚鱼鱼糜凝胶特性的影响
5) hydrophilic colloid
亲水胶体
1.
Effect of hydrophilic colloid on thermal stability of low fat meat emulsion products;
亲水胶体对低脂肉糜加热稳定性的影响
6) water seeking liquid
亲水液体
补充资料：亲液胶体
分子式：
CAS号：
性质：指分散相与分散介质的亲合力很高，以至于二者混合时可以自发分散，破坏后又可以可逆复原，形成热力学稳定的均相体系。此类胶体通常是指高分子溶液，包括高分子化合物溶液如蛋白质、酶类、纤维素类溶液、淀粉浆、胶浆等和高分子聚合物溶液如右旋糖苷、聚乙烯吡咯烷酮溶液等。与之相反，绝大多数无机物胶体的分散相与分散介质亲合力差，只能形成热力学不稳定的多相体系，这称为憎液胶体或疏液胶体（lyophobic colloid）。如果作为分散介质的液体是水、则分别称为亲水胶体（hydrophilic colloid）与疏水胶体(hydrophobic colloid)。
CAS号：
性质：指分散相与分散介质的亲合力很高，以至于二者混合时可以自发分散，破坏后又可以可逆复原，形成热力学稳定的均相体系。此类胶体通常是指高分子溶液，包括高分子化合物溶液如蛋白质、酶类、纤维素类溶液、淀粉浆、胶浆等和高分子聚合物溶液如右旋糖苷、聚乙烯吡咯烷酮溶液等。与之相反，绝大多数无机物胶体的分散相与分散介质亲合力差，只能形成热力学不稳定的多相体系，这称为憎液胶体或疏液胶体（lyophobic colloid）。如果作为分散介质的液体是水、则分别称为亲水胶体（hydrophilic colloid）与疏水胶体(hydrophobic colloid)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条