说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 梯形减振轨枕
1)  trapezoidal damping sleeper
梯形减振轨枕
1.
Combined with the construction of the experimental section of trapezoidal damping sleeper in Beijing Subway No.
结合北京地铁5号线梯形减振轨枕试铺段施工情况,简要介绍梯形减振轨枕模板的设计及制造特点,以及在模板制造过程中的质量控制要点。
2)  ladder sleeper
梯形轨枕
1.
Study on the Construction Technology of Ladder Sleeper Vibration Reduction Ballastless Bed on the Urban Rail Viaduct
城铁高架桥上梯形轨枕减振道床施工技术研究
2.
The paper describes the design of plane layout of ladder sleepers on curve sections with super-elevation and the method of installing super-elevation on curve sections.
阐述梯形轨枕在设有超高的曲线地段平面布置的计算方法,以及曲线地段超高的实现方法。
3.
The transfer mechanism of longitudinal forces of the rail equipped with ladder sleepers on bridge is different from that of traditional ballastless track because of structural differences.
梯形轨枕是一种新型的轨道结构形式,由于结构上的差异,桥上梯形轨道无缝线路纵向力传递机理与常规桥上无缝线路有所不同,而目前梯形枕的使用和研究尚处于起步阶段,对纵向力问题研究尚少。
3)  track damping
轨道减振
1.
Research purposes: This paper discussed the problems about the track damping design of urban rail transit.
研究目的:探讨城市轨道交通轨道减振设计的有关问题。
4)  sleeper vibration embedded
轨枕振动嵌入
1.
The paper describes some key technologies for the CRTS II bi-block ballastless track construction in tunnel,such as CPIII point setting and measurement technology,support footing installation and fine adjustment technology and sleeper vibration embedded technology,in the hope of providing some useful information for the passenger dedicated line s ballastless track construction.
详细介绍了隧道内CRTS II型双块式无砟轨道施工过程中的一些关键技术,如CPIII点测设技术、支脚安装精调技术、轨枕振动嵌入技术等,这些关键技术能为客运专线无砟轨道施工提供一些有益的参考。
5)  ladder tracks
梯形轨道
1.
This paper analyzes the vibration reduction characteristics of ladder tracks by numerical simulation and experiments based on the vibration experiments performed in the Laboratory of Tunnels and Underground Works of Beijing Jiaotong University.
结合北京交通大学地下工程实验室的减振试验,从试验结果分析、数值模拟2方面来研究梯形轨道的动力响应特性,试验结果和数值模拟都表明梯形轨道具有良好的减振性能:对28Hz以上频段引起的振动,减振效果可以达到40多dB;在对低频振动要求不太严格的地方,梯形轨道完全可以实现减振降噪的功能;为梯形轨道能够应用于地铁隧道减振提供了一定的理论支持。
6)  bolster snubber
摇枕摩擦减振器
补充资料:梯形


梯形
trapezium git trapezoid

  梯形Itra详口..或tra详zoid;Tpane”。al 一个凸四边形(见完全四边形(q业如卿e,com-plete)),其中两边平行,另两边不平行(见图).平行的两边称为梯形的底(加ses),不平行的两边称为它的腰(lateral sides);连接梯形两腰中点的线段称为中线(服diallline);梯形的中线平行于两底,并且等于两底之和的一半.梯形的面积等于梯形中线长度与其高之积,或者等于两对角线之积乘以对角线夹角正弦的二分之一两腰相等的梯形称为等腰梯形(equ口ate-阁t功砰涸uIn). 厂二入 EC3一3杜小杨译
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条