1) dynamic softening mechanism
动态软化机理
1.
By using the method of plane strain compression,the effect of distortion temperature on the hot ductility of 00Cr22Ni5Mo3N was studied,and the dynamic softening mechanism of 00Cr22Ni5Mo3N duplex phases during hot distortion was investigated.
通过平面应变压缩的试验方法,研究了变形温度对00Cr22Ni5Mo3N热塑性的影响,并通过TEM观察,探讨00Cr22Ni5Mo3N两相组织热变形动态软化机理。
2) dynamic softening
动态软化
1.
The results show that the considerable dynamic softening and ex.
研究结果表明:在500 ℃时,2519铝合金流动应力由于结构软化而存在相当强的动态软化和奇异的静态软化,导致第2道次的起始流动应力比前一道次的起始流动应力低;在热压缩变形道次间保温停歇后,流变应力出现明显的软化现象,保温停歇时间越长,合金软化率越高;变形及停歇保持温度越高,合金软化越严重。
2.
The compress during single and double passes for boron microalloyed steel was simulated using a gleeble-1500 thermal simulation testing apparatus, The quantitative effect of deformation temperature(T)、deformation degree(ε)、deformation rate(ε·)、primary grain size(d_0)、and interval time between passes(t)on static state and dynamic softening fraction(X)was obtained by nonlinear regression analysis.
运用gleeble-1500热模拟试验机November对含硼微合金钢进行了单、双道次压缩模拟,并通过非线性回归分析得到了静态与动态软化百分比(X)与变形温度(T)、变形程度(ε)、变形速率(ε·)、原始晶粒尺寸(d0)、道次间隔时间(t)之间的关系。
3.
It was indicated that the considerable dynamic softening and exceptional softening associate with a struc.
结果表明:在400℃时,1050和7075铝合金流动应力由于结构软化而存在相当强的动态软化和奇异的静态软化,导致第二道次的起始流动应力比前一道次的起始流动应力低;对于所有合金,静态软化随着变形温度和道次间保温及停留时间的增加而增加;但是在同一变形条件下,5182铝合金的静态软化速率比1050和7075铝合金高。
3) softening mechanism
软化机理
1.
Research progress on softening mechanism of juicy peach and preservatives
水蜜桃软化机理及其保鲜剂研究进展
5) the principle of Bellman stochastic optimization
Bellman随机动态最优化原理
补充资料：动态
①（事情）变化发展的情况：科技～ㄧ从这些图片里可以看出我国建设的～。②艺术形象表现出的活动神态：画中人物，～各异，栩栩如生。③运动变化状态的或从运动变化状态考察的：～工作点ㄧ～电流ㄧ～分析。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条