1) dynamic recrystallization softening fraction
动态再结晶软化率
1.
By using the experiment results of high-temperature compressive deformation of D2 steel, the relationship between dynamic recrystallization softening fraction of high-temperature derofmation and deformation conditions is investigated.
本文利用Ｄ２钢高温压缩变形的实验结果研究了高温变形时动态再结晶软化率与变形条件的关系，同时应用多元回归法回归出动态再结晶软化率的数学模型。
2) dynamic recrystallization
动态再结晶
1.
Research on dynamic recrystallization for high Nb pipeline steels produced with FTSR;
高Nb管线钢在FTSR工艺中的动态再结晶行为研究
2.
Prediction models of austenite dynamic recrystallization of medium-carbon microalloyed steel during forging process;
非调质钢锻造过程奥氏体动态再结晶模型的建立
3.
Modeling dynamic recrystallization of pure nickel by cellular automaton;
纯镍动态再结晶过程的元胞自动机模型
3) Dynamic Recrystalization
动态再结晶
1.
The fine grain and narrow HAZ were found in friction stir weld and the dynamic recrystalization produces fine grain.
焊核区由于动态再结晶具有细小的等轴晶粒,旁边存在一个特殊的组织形貌——热机影响区域。
4) dynamical recrystallization
动态再结晶
1.
The mathmatical models of volume fraciton and grain size after dynamical recrystallization were also obtained as follows.
同时,得到了F40MnV钢的动态再结晶动力学方程和动态再结晶晶粒尺寸的数学模型。
2.
The dynamical recrystallization behavior of Q235 steel under hot deformation was investigated by hot compression simulation test.
通过热模拟压缩试验,研究了Q235钢热变形时的动态再结晶行为,确定了其热变形激活能,建立了峰值应力、峰值应变、晶粒尺寸与Zener-Hollomon参数之间的关系模型。
5) recrystallization
动态再结晶
1.
Deformed structures and dynamic recrystallization patterns in W9Mo3Cr4V steel;
W9Mo3Cr4V钢高温形变组织及动态再结晶方式(英文)
2.
In this paper, nucleation and subsequent growth of nucleus-growth dynamic recrystallization have been investaged in high speed steels.
详细研究了高速钢中形核—长大方式动态再结晶时形核机制、长大过程，描述了各阶段的组织特征。
6) recrystallization softening curve
再结晶软化曲线
补充资料：二次再结晶(见再结晶晶粒长大)
二次再结晶(见再结晶晶粒长大)
secondary recrystallization
erCI 201」le」Ing二次再结晶(seeondary reerystallization) 见再结晶晶杠长大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条