For later easy extrusion,the alloy after filling is of above 85% liquid,And considering casting error,take 68 mm as the pouring height(h).

Based on the analysis of characteristics of heavy iron castings,it\'s considered that their casting method design principle should be as:bottom gating with dispersed ingates,fast and high temperature pouring.

Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;

Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;

Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;

Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;

This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.

The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.

Take 60t die-casting pouring basket as study subject,the melting pool depth of pouring basket,the level fluctuate of intermediate ladle under the influence of the pouring speed,as well as the immixture slag situation under any working circumstances have been researched.

Influence of pouring velocity on flow field was investigated in this paper.