1) Overheating Degree of Casting
浇注过热度
2) low superheat pouring
低过热度浇注
1.
The semi-solid of ZL101 aluminum alloy is manufactured by low superheat pouring.
采用低过热度浇注技术制备半固态ZL101铝合金,研究了冷却强度、保温时间、浇注温度对铸造显微组织的影响。
2.
The semi-solid AISiTMg alloy slurry with larger size was prepared by the low superheat pouring and traveling-wave electromagnetic stirring in this paper.
用低过热度浇注和弱行波电磁搅拌工艺制备半固态AlSi7Mg合金浆料,研究了浇注温度和搅拌功率对其初生α-Al形貌的影响。
3.
The semi-solid slurry of A356 aluminum alloy was prepared by a method of low superheat pouring and weak traveling-wave electromagnetic stirring and the effects of pouring temperature,stirring power and stirring time on the semi-solid slurry were investigated.
用低过热度浇注和弱行波电磁搅拌工艺制备A356铝合金半固态浆料,研究了浇注温度和搅拌功率等复合工艺参数对A356铝合金的半固态浆料的影响。
3) Casting Process
浇注过程
1.
Technology for preventing slag into liquid steel in the casting process;
浇注过程中的防下渣技术
2.
In this paper,the reason of slag entrapment during casting process and its disadvantages are introduced in ladle.
本文介绍了钢包浇注过程产生卷渣的原因及其所带来的危害,总结了目前减少下渣量、提高钢水收得率的技术方法和特点,重点分析了改进钢包底部结构对控制下渣的作用。
5) pouring temperature
浇注温度
1.
Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;
浇注温度对AlSi_9Mg半固态组织的影响
2.
Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;
浇注温度对双辊薄带凝固组织影响的模拟预测
3.
Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;
依据充型模拟确定铸件浇注温度
6) casting temperature
浇注温度
1.
Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;
浇注温度对间接挤压铸造Al-5Cu合金的影响
2.
This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.
研究了工业生产Sr变质亚共晶Al-7%Si合金时,变质剂含量、变质温度、变质时间、浇注温度等工艺参数对合金共晶硅细化及其性能的影响。
3.
The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.
采用挤压铸造法制备出 SiC 泡沫/SiC_p 混合增强铝基复合材料,研究了不同浇注温度对复合材料力学性能的影响及影响机制。
补充资料：热度
1.热的程度;温度。 2.指高于正常的体温。 3.犹热情。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条