1) low superheat pouring
![点击朗读](/dictall/images/read.gif)
低过热度浇注
1.
The semi-solid of ZL101 aluminum alloy is manufactured by low superheat pouring.
![点击朗读](/dictall/images/read.gif)
采用低过热度浇注技术制备半固态ZL101铝合金,研究了冷却强度、保温时间、浇注温度对铸造显微组织的影响。
2.
The semi-solid AISiTMg alloy slurry with larger size was prepared by the low superheat pouring and traveling-wave electromagnetic stirring in this paper.
用低过热度浇注和弱行波电磁搅拌工艺制备半固态AlSi7Mg合金浆料,研究了浇注温度和搅拌功率对其初生α-Al形貌的影响。
3.
The semi-solid slurry of A356 aluminum alloy was prepared by a method of low superheat pouring and weak traveling-wave electromagnetic stirring and the effects of pouring temperature,stirring power and stirring time on the semi-solid slurry were investigated.
用低过热度浇注和弱行波电磁搅拌工艺制备A356铝合金半固态浆料,研究了浇注温度和搅拌功率等复合工艺参数对A356铝合金的半固态浆料的影响。
2) Overheating Degree of Casting
![点击朗读](/dictall/images/read.gif)
浇注过热度
3) Lightweight castable
![点击朗读](/dictall/images/read.gif)
低密度浇注料
4) low viscosity casting process
![点击朗读](/dictall/images/read.gif)
低粘度浇注法
5) low superheat
![点击朗读](/dictall/images/read.gif)
低过热度
1.
Coupled Numerical Simulation of Flow Field and Temperature Field of Mold Concasting at Low Superheat by Two Rollers Cooling;
双辊冷却低过热度浇铸结晶器流场和温度场耦合数值模拟
2.
Based on the CFD software,the stable state pouring model of low superheat by two rollers cooling has been established in this paper.
文章基于CFD软件,建立了双辊冷却低过热度稳态浇铸模型,同时选材45#钢,模拟了不同拉速下冷却辊处及结晶器内部钢液的流场、温度场及凝固场分布,并分析了拉速的变化对各场分布的影响。
6) low temperature pouring
![点击朗读](/dictall/images/read.gif)
低温浇注
1.
In addition, the low temperature pouring under near liquidus can also refine the grain-size.
另外发现在近液相线温度下进行低温浇注也可以起到细化晶粒的作用,且在630℃下对熔体进行电脉冲处理后浇注得到的凝固态组织最好。
2.
The semi-solid slurry of ZL101 Al alloy,which was grain-refined by RE master alloy,was prepared by low temperature pouring.
利用稀土中间合金对液态ZL101铝合金进行了细化处理,并用低温浇注技术制备了ZL101铝合金半固态浆料,研究了细化处理对所制备ZL101铝合金的半固态初生α相形貌和尺寸的影响。
补充资料:体温过低
体温过低
指低温低于正常,为一种病态反应。常见于休克、急性大出血、慢性消耗性疾病,年老体弱,严重营养不良、甲状腺功能低下以及在低温环境中暴露过久等。对此在积极治疗原发病的同时应注意保暖。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条