1) isobaric channel
等压线通道
3) equal channel angular pressing
等通道转角挤压
1.
Effects of Equal Channel Angular Pressing on Microstructure and Properties of Al-5Ti-B Alloy;
Al-5Ti-1B合金等通道转角挤压的组织和性能研究
2.
Microstructure and mechanical properties of high-aluminium magnesium alloy processed by equal channel angular pressing;
等通道转角挤压高铝镁合金的微观组织和力学性能
3.
Three dimensional finite element analysis of Ti-6Al-4V alloy during equal channel angular pressing;
Ti-6Al-4V钛合金等通道转角挤压有限元模拟
4) Equal Channel Angular Extrusion
等通道转角挤压
1.
Shear Plastic Deformation Behavior of Polymer by Equal Channel Angular Extrusion Processing;
等通道转角挤压加工中聚合物剪切塑性变形行为分析
2.
Self-reinforced i-polypropylene processed by equal channel angular extrusion;
等通道转角挤压自增强等规聚丙烯研究
3.
Equal Channel Angular Extrusion Processing of PP and PP/HDPE Composite;
PP及PP/HDPE复合材料的等通道转角挤压加工
5) equal channel angular pressing
等通道角挤压
1.
5083 aluminum alloy was successfully processed by equal channel angular pressing(ECAP) with A and BC way For acquisition better grain refinement.
为了获得较细的晶粒,采用等通道角挤压(ECAP)变形的方法对5083铝合金按A和B两种方式进行变形;变形后两种样品用背散射电子衍射(EBSD)技术进行测定,获得了极图、反极图、取向差分布、晶粒尺寸等实验结果。
2.
A novel equal channel angular pressing(ECAP) based process called dissimilar channel angular pressing(DCAP) was conducted to 6061 aluminum.
采用一种基于等通道角挤压(ECAP)变形模式的全新的方法———DCAP 方法, 对6061 板料进行了DCAP变形, 并利用透射电镜和X射线衍射对6061 铝合金DCAP变形后的退火组织和织构进行了研究。
6) Equal-channel Angular Pressing
等通道转角挤压
1.
Research progressing of technology of equal-channel angular pressing(ECAP);
等通道转角挤压(ECAP)工艺的研究进展
2.
Microstructure and mechanical properties of ultrafine grained Mg15Al alloy processed by equal-channel angular pressing
等通道转角挤压制备超细晶Mg15Al双相合金组织与性能
3.
Effects of processing parameter of equal-channel angular pressing on the microstructure and properties of magnesium alloys
等通道转角挤压工艺参数对镁合金组织与性能的影响
补充资料:等压线
分子式:
CAS号:
性质:在表示系统的状态的状态图上,联结压力相同的状态的线。在理想气体的体积(V)-温度(T)图上,等压线是一条斜率为R/p的直线。R为气体常数,p为压力。
CAS号:
性质:在表示系统的状态的状态图上,联结压力相同的状态的线。在理想气体的体积(V)-温度(T)图上,等压线是一条斜率为R/p的直线。R为气体常数,p为压力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条