1) equal channel angular pressing
等通道弯角挤压
1.
Buck ultra-fine grained materials(submicrostructured or nanostructured materials) could be obtained by equal channel angular pressing (ECAP), and it is one of the most promising process for the industrialization.
等通道弯角挤压(ECAP)过程是目前制备块状超细晶粒材料(亚微米或纳米微观结构材料)最具工业前景的工艺之一,研究ECAP变形机理从而开发出具有工程化和商品化价值的工艺具有十分重要的意义。
2) equal-channel angular process(ECAP)
等通道弯曲挤压
1.
Ultrafine-grained 2J4 hysteresis alloy processed by equal-channel angular process(ECAP),has the average grain size approximate 0.
利用等通道弯曲挤压的方法得到的晶粒平均尺寸大约为0。
3) equal channel angular pressing
等通道转角挤压
1.
Effects of Equal Channel Angular Pressing on Microstructure and Properties of Al-5Ti-B Alloy;
Al-5Ti-1B合金等通道转角挤压的组织和性能研究
2.
Microstructure and mechanical properties of high-aluminium magnesium alloy processed by equal channel angular pressing;
等通道转角挤压高铝镁合金的微观组织和力学性能
3.
Three dimensional finite element analysis of Ti-6Al-4V alloy during equal channel angular pressing;
Ti-6Al-4V钛合金等通道转角挤压有限元模拟
4) Equal Channel Angular Extrusion
等通道转角挤压
1.
Shear Plastic Deformation Behavior of Polymer by Equal Channel Angular Extrusion Processing;
等通道转角挤压加工中聚合物剪切塑性变形行为分析
2.
Self-reinforced i-polypropylene processed by equal channel angular extrusion;
等通道转角挤压自增强等规聚丙烯研究
3.
Equal Channel Angular Extrusion Processing of PP and PP/HDPE Composite;
PP及PP／HDPE复合材料的等通道转角挤压加工
5) equal channel angular pressing
等通道角挤压
1.
5083 aluminum alloy was successfully processed by equal channel angular pressing(ECAP) with A and BC way For acquisition better grain refinement.
为了获得较细的晶粒,采用等通道角挤压(ECAP)变形的方法对5083铝合金按A和B两种方式进行变形;变形后两种样品用背散射电子衍射(EBSD)技术进行测定,获得了极图、反极图、取向差分布、晶粒尺寸等实验结果。
2.
A novel equal channel angular pressing(ECAP) based process called dissimilar channel angular pressing(DCAP) was conducted to 6061 aluminum.
采用一种基于等通道角挤压(ECAP)变形模式的全新的方法———DCAP 方法, 对6061 板料进行了DCAP变形, 并利用透射电镜和X射线衍射对6061 铝合金DCAP变形后的退火组织和织构进行了研究。
6) Equal-channel Angular Pressing
等通道转角挤压
1.
Research progressing of technology of equal-channel angular pressing(ECAP);
等通道转角挤压(ECAP)工艺的研究进展
2.
Microstructure and mechanical properties of ultrafine grained Mg15Al alloy processed by equal-channel angular pressing
等通道转角挤压制备超细晶Mg15Al双相合金组织与性能
3.
Effects of processing parameter of equal-channel angular pressing on the microstructure and properties of magnesium alloys
等通道转角挤压工艺参数对镁合金组织与性能的影响
补充资料：胎圈变形、弯钢圈、钢圈变形、口弯等
分子式：
CAS号：
性质：又称胎圈变形、弯钢圈、钢圈变形、口弯等。指轮胎胎圈表面局部高低不平的现象。 胎圈底部 bead base 又称胎圈基部。指轮胎与轮辋胎圈座接触的部位。其作用是保持胎圈与轮辋底部相着合。
CAS号：
性质：又称胎圈变形、弯钢圈、钢圈变形、口弯等。指轮胎胎圈表面局部高低不平的现象。 胎圈底部 bead base 又称胎圈基部。指轮胎与轮辋胎圈座接触的部位。其作用是保持胎圈与轮辋底部相着合。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条