1) subarine gate
潜入式浇口
2) submarine gate
潜伏式浇口
1.
A submarine gate mechanism with differential stretch breaking process
差动式拉断潜伏式浇口结构
2.
The design points of the molding part and the submarine gate were stated in detail.
分析了遥控器电池盖塑件的工艺结构及品质要求,介绍了基于Pro/E的注射模设计的基本流程,并详细介绍了该注射模的结构组成和设计过程,重点阐述了成型零件及潜伏式浇口的设计要点。
3.
The lagging f ejecting to submarine gate is also used in the mould and it can lengthen the life-span of the mould.
根据带环形外侧凹开关件的结构和工艺特点,在模具设计中采用插入式哈夫块的侧向抽芯机构成型环形外侧凹,使模具结构简单、加工方便;采用潜伏式浇口的滞后顶出,减少了模具使用中潜伏式浇口处的堵塞,延长了模具的寿命。
3) the inner side delitescent sprue
内侧潜伏式浇口
1.
The process structure characteristics and the quality demand of the battery covering of mobile telephone were analyzed, the structure and working process of the injection mold were introduced, the key points in designing the inner side delitescent sprue and designing the mechanism of the three orientation inner side core-pulling with the assembled slider were stated in detail.
分析了手机电池盖塑胶件的工艺结构特点及品质要求,介绍了其注射模的结构组成和工作过程,重点阐述了内侧潜伏式浇口及组合滑块三面内侧抽芯机构的设计要点。
4) sub-merged nozzle
潜入式水口
1.
It is observed that steel makers face the problem of alumina build up on the bore wall of sub-merged nozzle.
据观察,钢厂面临着铝堵塞潜入式水口内孔壁问题的困惑。
5) submarine gate
潜伏浇口
1.
the optimization position for submarine gate and cool canal as well as the characteristic of mold quality are fast obained.
0模块对电源插座板上盖进行了充分的工艺仿真分析,快速得到了潜伏浇口和冷却水道的最优开设位置以及模具的质量属性,从而优化模具设计流程、提高设计效率和减少设计过程中的错误。
2.
A particular injection mould with submarine gate and two-stage pushing out plastics by cavity plate and ejector pin for thin disk is designed.
设计了一种特殊的潜伏浇口型腔板-推杆二级推件薄圆盘注塑模,论述了模具结构特点和工作原理。
3.
An injection mould for the pipe joint was designed and the key points in the design of the submarine gate and the core asˉsembly were elaborated.
分析了内螺纹衬塑直角管接头在给水管道中的应用特点,分析了其成型工艺性,设计了1副内螺纹衬塑直角管接头注射模,其中特别探讨了潜伏浇口及组合型芯的设计要点,保证了脱模及抽芯的可靠性,最终实现了产品的成型。
6) flush air intake
潜入式进气口
补充资料：潜入
1.亦作"潜入"。 2.暗中进入。 3.钻进水中。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条