1) air heave
气胀变形(地)
2) dilatancy
[英][dai'leitənsi] [美][daɪ'letṇsɪ]
膨胀变形<地>
3) barometric bulging
气压胀形
1.
Discussion on barometric bulging processing parameters for profiled aerosol tank;
异形气雾罐气压胀形工艺参数的探讨
4) gas bulging forming
气胀成形
1.
The superplastic gas bulging forming of a rolled magnesium alloy AZ31 at different temperature and gas pressure was researched.
研究了AZ31镁合金板材不同工艺条件下的气胀成形性能。
2.
The Two-Stage gas bulging forming of a rolled magnesium alloy AZ31 under the conditions of 523 K,0.
7 MPa下的两阶段气胀成形性能。
3.
So it is necessary to study the hot stretch property and superplasticity,the gas bulging forming of hemispheroid and its finite element simulation of magnesium alloys for providing technical supports of plastic processing.
MARC软件模拟胀形结果,获得AZ31B镁合金板料模拟胀形时的压力-时间曲线,并以此确定超塑气胀成形实验时的实际压力-时间曲线。
5) press expansion
扩胀变形
1.
In order to simulate the acceleration pulse in impact tests, the design method of the acceleration pulse generator by the multi-segment tubes with different thicknesses based on the theory of metal tubes press expansion was researched.
为模拟碰撞实验中的加速度波形的要求,以金属圆管扩胀变形原理,通过不同壁厚圆管的分段组合形式研究了波形发生器的设计方法。
6) bulging deformation
鼓胀变形
1.
Bulging Deformation Analysis and Safety Assessment of Coking Tower;
焦炭塔鼓胀变形分析与安全评定
2.
The skirt from bottom to top of the tower was changed,and a nip convention out ektexine of coke tower was added to change the accepting force with coke tower in order to avoid the bulging deformation and cold crack with welding line below the coke tower.
将炼油行业传统焦炭塔的下裙座支撑改为上裙座支撑,在焦炭塔外壁增加一夹套,改变了焦炭塔的受力,避免了塔体下部鼓胀变形和焊缝冷裂纹的产生。
3.
In slashing running conditions,the bulging deformation of coke drums may appear after some years.
在苛刻的作业工况下,焦炭塔运行若干年后会出现筒体鼓胀变形。
补充资料：大坝内部变形观测(见水工建筑物变形观测)
大坝内部变形观测(见水工建筑物变形观测)
daba neibubianxing guanCe大坝内部变形观测见水工建筑物变形观测。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条