1.
Research on Gas Bulging Forming of AZ31 Magnesium Alloy Sheet in High Temperature;
AZ31镁合金板材高温气胀成形性能研究
2.
Research on Gas Bulging Forming and Simulation of AZ31B Magnesium Alloy Sheet
AZ31B镁合金薄板气胀成形及数值模拟
3.
Superplastic Gas Bulging Forming of AZ31B Magnesium Alloy Thin Sheet
AZ31B镁合金薄板超塑性气胀成形
4.
Numerical Simulation of Superplastic Bulging Process of AZ31 Magnesium Alloy Heart-shaped Part
AZ31镁合金心形件超塑气胀成形过程数值模拟
5.
Analysis on thickness distribution in superplastic bulge forming of aluminum alloy
铝合金超塑性气胀成形壁厚分布工艺研究
6.
Numerical Simulation and Experimental Study on Superplastic Air-bulging of AZ31 Magnesium Alloy Heart-shaped Part
AZ31镁合金心形件超塑气胀成形数值模拟与实验研究
7.
Forming Laws Analysis of Superplastic Bulging Process for AZ31 Magnesium Heart-shaped Part Based on Numerical Simulation
基于数值模拟的AZ31心形件超塑气胀成形规律分析
8.
Study on Finite Element Simulation of Superplastic Gas Bulging for Fine-Grained Magnesium Alloys Sheets;
细晶镁合金薄板超塑气胀成形有限元模拟与分析
9.
The edges in contact with the air take up moisture and stretch. The uneven expansion between the edges and the centre, produce wavy edges.
纸边接角空气，吸收水份而伸长。纸边和纸中心的不平均膨胀，造成浪形纸边。参阅弓形纸边。
10.
Forming Study and Process Control of the Multi-tube's Hydroforing;
多通管液压胀形成形研究及过程控制
11.
Study on Hydraulic Pressure Bulge Forming Theeory and Experiment of Thin Tube;
薄壁管液压胀形成形理论及试验研究
12.
Research on Gas Blowing Forming of AZ80 Magnesium Alloy Sheet
AZ80镁合金板材气压胀形工艺基础研究
13.
The rapid expansion of the bubble of hot, high-pressure gases formed in the underground burst initiates a shock wave in the earth.
由于地下爆炸所形成的热高压气泡迅速澎胀，在地面上便产生冲击波。
14.
Finite element analysis of basin-shape parts in bulge-forming of polycarbonate sheet
热态气压胀形聚碳酸脂板材盆形件有限元分析
15.
Load-Carrying and Compensation Analysis of the V-Shaped Expansion Joint and Simulation of the Manufacture Process of the Expansion Joint
V形膨胀节的承载和补偿能力分析及膨胀节成形过程模拟
16.
Gansu's economy has formed a high growth and low inflation development pattern
甘肃经济形成高增长低通胀发展格局
17.
Formation and properties of low expansive and heat-resistant aluminum alloy with high silicon content
耐热低膨胀高硅铝合金的成形与性能
18.
Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique
薄壁小半径弯管与中压内胀成形工艺