1)  V-5Cr-5Ti alloy
V-5Cr-5Ti 合金
1.
Hot compressive experiments of V-5Cr-5Ti alloy with constant strain rate were conducted on Gleeble 1500 hot simulator.
在 Gleeble1500热模拟试验机上对 V-5Cr-5Ti 合金进行了恒定应变速率热压缩实验。
2)  V-5Cr-5Ti alloy
V-5Cr-5Ti合金
1.
Tests of hot compression of cast V-5Cr-5Ti alloy with constant strain rate were conducted on Gleeble 1500 hot simulator.
在Gleeble1500热模拟材料试验机上对铸态V-5Cr-5Ti合金进行恒定应变速率热压缩模拟实验。
3)  V-5Cr-5Ti
V-5Cr-5Ti
1.
The mathematical model research of deformation resistance of V-5Cr-5Ti alloys;
V-5Cr-5Ti合金变形抗力的数学模型
4)  alloy
合金
1.
Preparation of AB_5 type hydrogen storage alloy by direct electro-deoxidization in molten salt;
熔盐电脱氧法制备AB_5型储氢合金的研究
2.
Application of Compatibilizers in PC/ABS Alloy;
相容剂及其在PC/ABS合金中的应用
3.
Alloy Transfer and the Effect on Hardness of Surfacing Welded Metal;
合金元素过渡及对堆焊金属硬度的影响
5)  alloys
合金
1.
The influence of spectral interferences on trace analysis of steels & alloys by inductively coupled plasma mass spectrometry;
电感耦合等离子体质谱干扰对钢铁及合金痕量分析的影响
2.
Crystallization characteristics and impact property of polypropylene/poly(cis-butadiene) rubber alloys;
等规聚丙烯／顺丁橡胶合金的结晶和抗冲击性能
3.
The Effect of Ferrous Sulphate on the Electroless Depositionof Co-Fe-P Alloys;
硫酸亚铁对化学沉积钴-铁-磷合金中的影响(英文)
6)  blends
合金
1.
Study on the Properties of Chlorinated Polyvinyl Chloride and Chlorinated Polyvinyl Chloride/Polyvinyl Chloride Blends;
CPVC及CPVC/PVC合金的性能研究
2.
The heat stability of ABS & PVC blends were compared and analyzed with the color degradation of heat aging.
通过热烘变色试验, 对ABS/PVC合金的热稳定性进行分析。
3.
PMMA/MCS blends with different composition were prepared for our investigation.
通过聚甲基丙烯酸甲酯（ Ｐ Ｍ Ｍ Ａ）及 Ｍ Ｃ Ｓ树脂共混，改善了 Ｐ Ｍ Ｍ Ａ 树脂的力学性能，特别是抗冲击性能，得到了综合性能优良的高分子合金材料。
参考词条
补充资料：Ti-13V-11Cr-3A1 alloy
分子式：
CAS号：

性质：β钛合金。成分为钒13％，铬11％，铝3％，余量钛。退火后室温机械性能：抗拉强度862MPa，屈服强度827MPa，延伸率10％，弹性模量10.34×104MPa，HRC硬度32～36。采用真空自耗电弧炉熔炼制取。制造紧固件和较大面积的模锻件。  

说明：补充资料仅用于学习参考，请勿用于其它任何用途。