说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 镁合金
1)  magnesium alloy
镁合金
1.
Microstructure effect on casting magnesium alloy by using different corrosive medias and pre-treatment processing;
不同腐蚀介质与预处理工艺对铸造镁合金显微组织的影响
2.
Effects of Ca on Microstructure and Properties of AZ4.51 Wrought Magnesium Alloy;
Ca对AZ4.51变形镁合金组织和性能的影响
3.
Influences of friction stir welding parameters on microstructure and mechanical properties of dissimilar magnesium alloys joint;
搅拌摩擦焊工艺参数对异种镁合金接头组织和性能的影响
2)  magnesium alloys
镁合金
1.
Research progress in effects of the substrate on coating properties formed on magnesium alloys;
基体对镁合金氧化膜性能影响的研究进展
2.
The impact wear behavior of AZ91D magnesium alloys in de-ionized water;
AZ91D镁合金在水介质下的冲击磨损特性研究
3.
Deformation mechanisms, current status and development direction of superplastic magnesium alloys;
镁合金超塑性的变形机理﹑研究现状及发展趋势
3)  Mg alloy
镁合金
1.
Study on anodic films on Mg alloy obtained with applied constant current densities at low voltages;
镁合金低压恒流阳极氧化膜研究
2.
Comparison of the(Ti,Al)N coatings on Al and Mg alloy substrate by AIP;
铝和镁合金上电弧离子镀(Ti,Al)N梯度涂层的比较
3.
Study on microarc oxidation processes for Mg alloy;
镁合金微弧氧化膜的制备工艺研究
4)  Mg alloys
镁合金
1.
Mg alloys reinforced by long-period ordered structure are promising candidates for lightweight structural materials developed recently.
长周期结构增强镁合金是近年来新发展的一种具有应用前景的镁合金新型结构材料。
2.
The Squeezing Casting to produce Mg alloys (AM60B) wheels of autocycle has been introduced with investigation of its technique and discussion about the material capability of the casting,the production technology parameter of indirect squeezing casting,the various defects of the casting and the solving measures.
本文详细介绍了采用AM60B镁合金和液态挤压铸造技术成形摩托车轮毂,对该铸件的成形工艺进行了详尽的分析,并对铸件材料性能、液态挤压铸造的成形工艺参数、铸件的缺陷分析及其解决的措施进行了讨论。
3.
The physical properties of traditional RJ-2' flux and two kinds of German fluxes(ElrasalB and ElrasalC) used in Mg alloys was studied, including viscosity,density and surface tension.
本文研究了传统的RJ 2号熔剂及德国ElrasalB、ElrasalC三种配方的镁合金覆盖熔剂的物理性能 ,包括粘度、密度和表面张力。
5)  magnesium and its alloys
镁及镁合金
1.
Based on recently published papers and information on magnesium and its alloys, this paper introduced the distribution and exploitation of magnesium over the world, reviewed the product development, application and market of magnesium and its alloys in last century, especially in last two decades.
根据近年来国内外发表和公布的有关镁及镁合金的文章和信息,介绍了世界镁资源的分布及开采,回顾了上个世纪特别是近20年来世界镁合金及产品的发展,使用和市场概况。
2.
This paper reviews corrosion behavior of magnesium and its alloys and the possibility of their application as biomaterials.
对镁及镁合金作为生物材料的可能性和研究进展进行了评述。
6)  magnesium and magnesium alloys
镁及镁合金
补充资料:镁合金
镁合金
magnesium alloy
    
    以镁为基体加入其他元素而构成的有色合金。主要合金元素有铝、锌、锰、锆、钍、稀土金属等。镁合金的特点是,比强度和比刚度高,相同重量的构件,采用镁合金可获得比钢和铝合金更高的刚度;阻尼容量高,减振能力强,适于制造承受冲击载荷和振动的零部件;负电性高,与其他金属直接接触时,会产生接触腐蚀,因此必须采用涂层、镀层等保护层,但可作为牺牲阳极材料直接使用;化学活性强,在加工过程中必须用熔剂或气体加以保护,以防止与水接触时发生燃烧或爆炸。
    按制造工艺分为变形镁合金和铸造镁合金。变形镁合金可通过塑性变形加工成板材、带材、管材、棒材、型材和锻件等。主要有镁锰系合金 、镁铝锌系合金 、镁锌锆系合金、镁稀土金属系合金、镁钍系合金和镁锂系合金,多用作航空航天器的结构材料和飞机蒙皮等。铸造镁合金可通过铸造工艺制成外形和内腔形状很复杂的零件。主要有含铝镁合金和含锆镁合金,后者又有镁锌锆系合金、镁稀土锆系合金和新发展的含钇、含钕镁合金,多用于制造飞机、汽车、摩托车、电影机械的零部件,以减轻重量,提高性能。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条