1) electrolytic coloration
电注入着色
1.
Hydroxyl-doped potassium iodide polycrystals were successfully colored electrolytically for the first time using a technique of electrolytic coloration, and a lot of color centers were produced in the colored polycrystals.
利用电注入着色技术,首次对掺氢氧根碘化钾多晶电注入着色,在着色多晶中产生大量色心。
2) electrolytic coloring
电解着色
1.
Effect of ac pore-enlarging on electrolytic coloring of anodized aluminum film;
交流扩孔对铝氧化膜电解着色的影响
2.
Advances on the electrolytic coloring technology of aluminum alloy;
铝合金电解着色技术的进展
3.
Studies on the specific stabilizer for electrolytic coloring of aluminum and its alloys on tin salts solutions;
铝及其合金锡盐电解着色特效稳定剂的研究
3) electroplating tinting
电镀着色
1.
One practical package of technological formula and parameter about electroplating tinting for ABS plastic are provided, including stress riddance, unoil, coarsing, sensitization, activating, revive treatment, and five-colored electroplating tinting.
介绍(丙烯腈/丁二烯/苯乙烯)共聚物(ABS)制品的表面预处理、化学镀铜、电镀光亮铜和镀铜层着色等工艺,提供了一整套ABS电镀着色的实用配方和工艺参数,包括去应力、除油、粗化、敏化、活化、还原处理及镀铜层五色系实用着色等。
4) electrolytic coloration
电解着色
1.
The lubricating particles of MoS2 are able to be co- deposited into the pores of aluminium anodized film with metal nickel by electrolytic coloration after the aluminium anodizing process with sulfuric acid.
利用电解着色技术对硫酸阳极氧化膜进行镍盐着色,使MoS2润滑性粒子同金属一起沉积于氧化膜孔隙之中。
2.
The compound chromium oxide film, which has been formed on the surface of stainless steel after electrolytic coloration, can improve the passivaty, make the corrosion potential shift positively and enhance the electrochemical behavior.
电解着色不锈钢表面形成铬的复合氧化膜，增强了钝性，使得自然电位和阳极极化电位正移，提高了膜层的电化学稳定性能。
5) electrolytic colouring
电解着色
1.
Study on the micro analysis of colouring films and the mechanism of electrolytic colouring of aluminium;
铝二次电解着色膜微观分析及着色机制
2.
The two-step electrolytic colouring method was adopted.
采用二步交流电解着色法,研究了硫酸阳极氧化膜、着色液成分对1235铝合金着色效果的影响,提出了最佳工艺条件。
3.
Coloured stainless steel may be prepared in brown, blue, yellow, red, or green by square-wave AC electrolytic colouring.
用交流方波电解着色法可以制备茶色、蓝色、黄色、红色、绿色等颜色的不锈钢。
6) coloring power source
着色电源
1.
Anodizing coloring mechanism of titanium and its alloys was analyzed to make sure the relationship of fiun thickness and coloring power source, so that the technological method and current design parameters were deduced to keep the color consistence of bath production, which provided an available method for coloring of titanium and its alloys.
着色电源稳压精度的高低直接影响着色膜的质量,批量化生产对着色电源的稳压精度要求更高。
补充资料：厂用电受电
厂用电受电
energizing of auxiliary power system
chongyongd一on sho一Jd一on厂用电受电(energizing of auxiliary powersystem)机组附属设备安装完毕后需通电试运行，所需厂用电源由外部供给，因此厂用电受电是调试工作开始的标志。 受电步骤新建电厂先由电力系统向变电站供电，再依次对高压起动/备用变压器、3~10kv厂用配电装置、厂用工作变压器及380V配电装置供电。扩建电厂因高压起动/备用变压器已经投人运行，故可利用它的电源对扩建的厂用配电装置等供电。 调试项目主要有:①用额定电压依次对空载线路、变电站母线、隔离开关、断瘩器、互感器、变压器及厂用配电装置等进行冲击合闸试验。有条件时.冲击合闸前应先进行递升加压试验。升压过程中注意检查各设备有无放电声及短路现象，发现问题及时处理后再进行升压。②检查三相电压应平衡，相序应正确，各段母线的相位彼此应一致。对配电装置供电时，有时会由于母线电容和与母线连接的电磁式电压互感器的电感相互作用而出现铁磁谐振，此时相电压升高，中性点明显位移。为消除谐振可在电压互感器的剩余电压绕组处并联电阻以去振。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条