1) straight-line flow
直线流
1.
In order to find a workable way of powder transportation in outer space, the air transportation of powder by straight-line flow in microgravity was researched.
为了寻找一种在太空生产中的可行的材料输送方式,研究了微小重力下直线流粉粒体气力输送。
2) rectilinear flow,straight line motion,straight-line flow
直线流动
3) ideal inherent linear flow charecteristic
固有直线流量特性
4) line
直线
1.
Study on the Judgement of Two Lines Relative Position;
判断二直线相对位置问题的研究
2.
Analysis of structure design and control of a linear switched reluctance motor[LSRM];
直线开关磁阻电机的结构设计与控制
3.
Drawing and Clipping of Lines and Curves;
直线和曲线的生成与裁剪
5) straight line
直线
1.
A kind of synthesizing method for accurate trace guiding mechanism of straight lines and circles;
一种精确直线、圆轨迹导引机构的综合方法
2.
A universal algorithm for tracing straight line;
基于矢量空间的直线跟踪算法
3.
Designs for presentation of straight line and line segment;
《直线和线段》导课设计种种
6) Straight-line
直线
1.
A general synthesis model of mixed-point straight-line linkage in the general condition was established,and some key parameters in the equations were solved.
采用解析法建立了一般情况下混合点近似直线机构综合的通用数学模型,并给出了方程中关键参数的求解方法。
2.
Based on the synthesis theory concerning the mixed point straight-line four-bar linkage in the special condition, a research method with the circle center and circle point as parameters is proposed.
对在特殊条件下混合点直线四杆机构的综合进行了研究,以圆心、圆点坐标为研究 混合点直线四杆机构的参数,推导出一般条件下的综合公式并用实例验证了公式的正确性。
参考词条
补充资料:ZLG系列直线振动流化床(2)
主要用途
1.医药化工业:各种打片颗粒硼砂笨二酚各种加剂等.
2.食品,建材业:酒糟、味精、砂糖、食盐、矿粉、矿渣、豆瓣等。
3.适应各种物料的干燥冷却增湿等作业.
工作原理
物料自进料口进入机内,在激振力作用下,物料沿水平方向抛掷向前连续运动,热风穿过流化床孔板向上穿过同物料换热后,由排风口排出,干燥物料由排料口排出.
特点
振动源是采用振动电机驱动,运转平稳,维修方便,噪音低,寿命长.
流态化匀称,无死空隙和吹穿现象,可以获得均匀的干燥、冷却制品。
可调性好,适用面宽。料层厚度和在机内移动速度 以及全振幅变更均可实现无级调节。
对物料表面的损伤小,可用于易碎物料的干燥,物料颗粒不规则时亦不影响工作效果。
采用全封闭式的结构,有效地防止了物料与空气间交叉感染,作业环境清洁。
机械效率与热效率高,节能效果好,比一般干燥装置可节能30-60%。
技术参数
项目名称 | 单位 | ZLG3x0.3 | ZLG3x0.6 | ZLG4.5x0.6 | ZLG6x0.6 | ZLG7.5x0.6 | ZLG7.5x1.2 |
网板面积 | m2 | 0.9 | 1.8 | 2.7 | 3.6 | 4.5 | 9 |
水份蒸发量(130℃) | kg/h | 30 | 60 | 85 | 115 | 125 | 200 |
蒸气压力 | MPa | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
激振力 | kgf | 500 | 800 | 800 | 1600 | 3200 | 5000 |
激振频率 | 次/min | 3000 | 3000 | 3000 | 3000 | 1500 | 1500 |
总功率 | kw | 6 | 7.5 | 10 | 13 | 17.5 | 34.5 |
外形尺寸
B1 | A1 | A | B | C | 重量kg |
3000(mm) | 300 | 1350 | 3400 | 1700 | 1240 |
600 | 1650 | 3400 | 1700 | 1400 | |
900 | 1950 | 3400 | 1850 | 1630 | |
4500(mm) | 300 | 1350 | 5000 | 1700 | 1570 |
600 | 1650 | 5000 | 1700 | 1860 | |
900 | 1950 | 5000 | 1850 | 2430 | |
6000(mm) | 600 | 1700 | 6510 | 1700 | 2410 |
900 | 2000 | 6510 | 1850 | 3160 | |
1200 | 2400 | 6510 | 2050 | 3580 | |
7500(mm) | 600 | 2100 | 8020 | 1850 | 4140 |
900 | 2500 | 8020 | 2040 | 5190 | |
1200 | 2850 | 8020 | 2450 | 5940 | |
1500 | 3250 | 8020 | 2570 | 6426 | |
8000(mm) | 1800 | 3250 | 8020 | 3100 | 8600 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。