说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 磁流变减振驱动器
1)  MR damper
磁流变减振驱动器
1.
Mechanism and application of semi-active MR dampers;
半主动磁流变减振驱动器的工作原理及应用
2)  MR fluid shock absorber
磁流变减振器
1.
Based on the response signal of Magnetorheological (MR) Fluid Shock Absorber, the method of fuzzy control is used on the MR fluid shock absorber control.
基于磁流变减振器的振动响应信号,将模糊控制方法应用于磁流变减振器的控制。
2.
In light of the response signal of a magnetorheological(MR) fluid shock absorber,the pattern reasoning control method is used for the control of the MR fluid shock absorber of an automobile.
基于磁流变减振器的振动响应信号,将模式推理控制方法应用于汽车磁流变减振器的控制。
3)  MR Damper
磁流变减振器
1.
Temperature Characteristic of One Tube MR Damper;
单筒磁流变减振器散热性能研究
2.
Experimental Study and Design of MR Damper;
磁流变减振器设计及试验研究
3.
MR dampers has attracted attention for its low-expender,short response time characteristics.
出于提高车辆悬架性能的目的,国内外对主动、半主动悬架相关技术展开了深入研究,磁流变减振器因为具有能耗低、响应快、可控性好等特点而受到特别关注。
4)  MRF damper
磁流变减振器
1.
Experiment and analysis for damping force of an MRF damper in semi-active vibration control suspension systems;
半主动悬挂系统磁流变减振器的阻尼力实验与分析
2.
The damping force of a MRF damper was analyzed using Bingham model and all the fac- tors having effect on the damping force of a MRF damper were discussed by studying the experimental data of self-made MRF shear-valve damper.
基于磁流变体本构关系的Bingham模型,在对自行研制的双出杆剪切阀式磁流变减振器进行实验研究的基础上,对影响磁流变减振器阻尼力的各种因素进行了综合分析。
3.
Based on Bingham model, the damping force of a MRF damper was analyzed.
履带车辆磁流变减振器半主动悬挂系统,是未来高速履带车辆悬挂系统的发展方向。
5)  magneto-rheological damper
磁流变减振器
1.
Analysis of dynamics model of magneto-rheological damper in vehicle suspension and research of its semi-active control strategy;
汽车悬架磁流变减振器模型分析及半主动控制策略研究
2.
Dynamic analysis on damping force of magneto-rheological damper in automobile running processes
汽车行驶中磁流变减振器阻尼力的动态分析
3.
Working principles and models of the automobile magneto-rheological damper was analyzed and the future focus was discussed after summarizing the simulati.
本文中介绍车用阻尼器的应用与研究现状;磁流变液的组成及磁流变效应基本原理,分析磁流变减振器的工作原理及其数学模型;结合国内外最新研究成果,综述用于汽车悬架的MR减振器的仿真模型、控制方法和测试技术,并对今后的研究工作重点进行了探讨。
6)  magneto-rheological fluid damper
磁流变液减振器
1.
Research on control strategy for simulation working condition test-bed of magneto-rheological fluid damper;
磁流变液减振器模拟工况实验台控制策略研究
补充资料:磁电式测振传感器
分子式:
分子量:
CAS号:

性质:机械振动电测法传感器的一种。属绝对式惯性振动传感器。这类传感器的一种结构及其工作原理如图所示,当传感器被固定安装在被测的振动体上并与之一起振动时,通过弹簧片,形成由线圈、阻尼环和芯轴组成的质量块与壳体之间的相对运动,线圈在壳体与磁钢之间的间隙内对磁力线进行了切割,产生感应电动势,并从引出线输出感应电压信号,再经放大器及电压表示波器,显示对应的振动参数值。这种传感器的灵敏度取决于弹簧片的机械强度,并与线圈的高频电感量的精度直接相关。设计制造时,对弹簧片的刚性要求很高,以保证其固有频率保持在一定范围以内,线圈的电感特性也有严格的要求,以保证传感器具有高灵敏度。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条