1) shell-and-tube heat exchanger
壳管式换热器
1.
Puts forward the technique of flushing the heat exchanger bundles alternately with high head water for shell-and-tube heat exchangers.
针对壳管式换热器提出采用换热管束高压头强力轮替冲洗工艺除污。
2.
A system has been established to conduct the experimental study of dynamic characteristics of shell-and-tube heat exchangers.
建立了可进行壳管式换热器动态特性试验研究系统,通过试验研究的方法对水-油为换热工质的连续螺旋折流板管壳式换热器动态特性进行了试验研究,进口流量扰动为等百分比流量特性,研究了4种流量扰动方式下水和油出口温度的动态响应。
3.
The experimental system was designed to investigate the dynamic behaviours of shell-and-tube heat exchangers with continuous baffles,the cooling water flowing in tubes and hot oil flowing across the tube bank.
建立了可进行壳管式换热器动态特性试验研究系统,通过试验研究的方法对水-油为换热工质的连续螺旋折流板换热器动态特性进行了试验研究,进口流量扰动为等百分比流量特性,研究了四种流量扰动方式下水和油出口温度的动态响应。
2) shell and tube heat exchanger
壳管式换热器
1.
In this paper,the author tried to set up shell and tube heat exchanger of the transfer function,and made use of the simulink block,according to the matlab software,to analyze and simulate it.
壳管式换热器在化工和食品行业中有着广泛的应用,对其分析的方法与手段也有很多。
3) tubular heat exchanger
管壳式换热器
1.
Loads analysis of anchor bolts of a horizontal tubular heat exchanger;
卧式管壳式换热器地脚螺栓受力分析
2.
The Estimate of Heat Exchange Tubes Number in the Tubular Heat Exchanger;
管壳式换热器换热管根数的估算
3.
Thermoeconomic design of tubular heat exchanger;
管壳式换热器的经济学优化设计
4) shell and tube heat exchanger
管壳式换热器
1.
The Direction and Development of shell and tube heat exchanger;
管壳式换热器的研究进展与方向
2.
A Study on the Local Void Fraction at the Shell Side of No-Leak Shell and Tube Heat Exchangers;
无泄漏的管壳式换热器壳侧局部含气率的研究
3.
Evaluation methods to heat transfer enhancement performance in shell of shell and tube heat exchanger;
管壳式换热器壳程强化传热评价方法分析
5) shell-and-tube heat exchanger
管壳式换热器
1.
Investigation in baffle-rod support on shell-and-tube heat exchanger;
管壳式换热器杆式支撑结构的研究与应用
2.
Analysis of the transient heat transfer performance of shell-and-tube heat exchangers;
管壳式换热器瞬态换热性能分析
3.
The Existing Problems in Design and Operation of Shell-and-Tube Heat Exchanger;
管壳式换热器设计和运行中存在的问题分析
6) tube-shell heat exchanger
管壳式换热器
1.
Numerical simulation of heat transfer enhancement by strip-coil-baffles in tube-bundle for a tube-shell heat exchanger;
螺旋折流片强化管壳式换热器内管束传热数值模拟(英文)
2.
An experimental comparative investigation on the influence of centrifugal buoyancy on the heat transfer enhancement of swirling flow was carried out via exchanging hot and cool water in shell-side and tube-side respectively in a swirling flow tube-shell heat exchanger,in which heat transfer was enhanced by spiral fluted tubes and rod baffles.
故在有旋流存在的管壳式换热器中,离心浮力对换热器传热性能的影响不可忽视。
3.
A four-tube mathematic-physical model with two coil-strip sleeved tubes and two bare ones oppositely placed at each corner of a square was established for quadrilateral tube arrangement in a coil-strip-baffled tube-shell heat exchanger.
针对螺旋折流片管壳式换热器的正方形布管方式,建立了相间套螺旋折流片的四管数学物理模型,利用FLUENT软件对该模型的流动与传热情况进行了数值模拟;并与光滑通道中及单管螺旋折流片模型的流动和传热结果进行了对比。
补充资料：壳管式换热器
分子式：
CAS号：
性质：见列管式换热器 。
CAS号：
性质：见列管式换热器 。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条