1) bearing oil
轴承油
1.
Development of the technique and device for dynamic stability of surface tension of bearing oil
轴承油表面张力动态稳定技术及装置开发
2.
The specification, quality of anti-friction film bearing oil # 100 and its' large-scale bench-test and trial run-test are presented in this paper.
介绍了兰炼100号抗磨型油膜轴承油规格标准、实验室和工业产品质量、大型全尺寸台架试验以及工业实机使用试验情况。
2) oil-film bearing
油膜轴承
1.
Study on contact damage of sleeve of oil-film bearing in rolling mill;
大型轧机油膜轴承锥套损伤问题研究
2.
The Oil-film Temperature Fild Analysis of Oil-film Bearing Based on ANSYS;
基于ANSYS的油膜轴承油膜温度场分析
3.
This paper presented the mechanism of fretting fatigue failure that happened on the contact surfaces between sleeve and roll neck of oil-film bearing under the rolling load.
研究了油膜轴承锥套与辊颈接触表面在轧制载荷作用下发生微动疲劳损伤的力学机理。
3) oil film bearing
油膜轴承
1.
Design and analysis of structural parameters for capillary oil film bearing
毛细管节流的油膜轴承结构参数设计分析
2.
A modern large-scale mill's perfect bearing——oil film bearing,a key part of the mill,has many advantages,such as large carrying capacity,long service life,wide speed range,low friction coefficient,small configuration size,strong impact resistance,etc.
现代大型轧机的理想轴承——油膜轴承是轧机的关键部件,具有承载能力大、使用寿命长、速度范围广、摩擦因数小、结构尺寸小、抗冲击能力强等优点。
3.
Baosteel Branch's 5m mill is the first especially wide and heavy plate production line,and oil film bearing is one part of its main equipment.
宝钢分公司厚板厂5m轧机是国内第一条特宽幅厚板生产线,油膜轴承是厚板轧机的主要设备之一,正确认识和掌握其特点是提高厚板生产的关键环节。
4) self lubricating bearings
含油轴承
1.
The partially alloyed CuSn10 powder for high speed,low noise and self lubricating bearingshad been successfully developed by Cu Sn alloying process The characteristics of powders were investigated by SEM The influence of powder mixing process,green density,diffusion time and temperature on the properties of powders were discusse
本文通过对电解Cu粉、雾化Sn粉的部分合金化过程的研究 ,制备出适于制造高速、低噪音、微型含油轴承的CuSn1 0部分合金化粉末。
5) oil bearing
含油轴承
1.
Comparing research has been done between Fe Cu and bronze P/M oil bearings for odometers.
本文针对里程表用含油轴承 ,对粉末冶金铁 铜和青铜材料进行了对比研究。
6) Porous bearings
含油轴承
1.
Performance and tribological character of journal porous bearings under micro-load were studied.
采用自行研制的径向轴承微载荷摩擦试验机研究了微载荷下径向含油轴承的摩擦性能,采用小波方法对试验数据进行滤波降噪。
2.
In appliances of IT and MEMS equipments, the tribological characteristics especially friction stability under micro-loads become key factors for the performances of porous bearings, but the study of these topics has not been carried out in the past.
信息技术和微型机电设备中，含油轴承的应用日益广泛。
3.
The porous bearings are extensively used in mechanical engineering and so on.
含油轴承润滑、维修方便,因此在机械和机电产品中得到广泛应用。
补充资料：轴承油
分子式：
分子量：
CAS号：
性质：具有良好的耐磨性、冷却性、防锈性和抗氧化安全定性。凝点不大于-15℃。适用于精密机床主轴轴承及其他以压力油浴、油雾润滑的滑动或滚动轴承的润滑。分抗氧防锈型和抗氧防锈抗磨型两大品种。以原油蒸馏、溶剂精制、溶剂脱蜡和白土补充精制后的润滑油组分，加入抗氧、防锈、抗磨等添加剂调制而成。
分子量：
CAS号：
性质：具有良好的耐磨性、冷却性、防锈性和抗氧化安全定性。凝点不大于-15℃。适用于精密机床主轴轴承及其他以压力油浴、油雾润滑的滑动或滚动轴承的润滑。分抗氧防锈型和抗氧防锈抗磨型两大品种。以原油蒸馏、溶剂精制、溶剂脱蜡和白土补充精制后的润滑油组分，加入抗氧、防锈、抗磨等添加剂调制而成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条