1) thin oil bearing
稀油轴承
2) oil-film bearing
油膜轴承
1.
Study on contact damage of sleeve of oil-film bearing in rolling mill;
大型轧机油膜轴承锥套损伤问题研究
2.
The Oil-film Temperature Fild Analysis of Oil-film Bearing Based on ANSYS;
基于ANSYS的油膜轴承油膜温度场分析
3.
This paper presented the mechanism of fretting fatigue failure that happened on the contact surfaces between sleeve and roll neck of oil-film bearing under the rolling load.
研究了油膜轴承锥套与辊颈接触表面在轧制载荷作用下发生微动疲劳损伤的力学机理。
3) oil film bearing
油膜轴承
1.
Design and analysis of structural parameters for capillary oil film bearing
毛细管节流的油膜轴承结构参数设计分析
2.
A modern large-scale mill's perfect bearing——oil film bearing,a key part of the mill,has many advantages,such as large carrying capacity,long service life,wide speed range,low friction coefficient,small configuration size,strong impact resistance,etc.
现代大型轧机的理想轴承——油膜轴承是轧机的关键部件,具有承载能力大、使用寿命长、速度范围广、摩擦因数小、结构尺寸小、抗冲击能力强等优点。
3.
Baosteel Branch's 5m mill is the first especially wide and heavy plate production line,and oil film bearing is one part of its main equipment.
宝钢分公司厚板厂5m轧机是国内第一条特宽幅厚板生产线,油膜轴承是厚板轧机的主要设备之一,正确认识和掌握其特点是提高厚板生产的关键环节。
4) self lubricating bearings
含油轴承
1.
The partially alloyed CuSn10 powder for high speed,low noise and self lubricating bearingshad been successfully developed by Cu Sn alloying process The characteristics of powders were investigated by SEM The influence of powder mixing process,green density,diffusion time and temperature on the properties of powders were discusse
本文通过对电解Cu粉、雾化Sn粉的部分合金化过程的研究 ,制备出适于制造高速、低噪音、微型含油轴承的CuSn1 0部分合金化粉末。
5) oil bearing
含油轴承
1.
Comparing research has been done between Fe Cu and bronze P/M oil bearings for odometers.
本文针对里程表用含油轴承 ,对粉末冶金铁 铜和青铜材料进行了对比研究。
6) bearing oil
轴承油
1.
Development of the technique and device for dynamic stability of surface tension of bearing oil
轴承油表面张力动态稳定技术及装置开发
2.
The specification, quality of anti-friction film bearing oil # 100 and its' large-scale bench-test and trial run-test are presented in this paper.
介绍了兰炼100号抗磨型油膜轴承油规格标准、实验室和工业产品质量、大型全尺寸台架试验以及工业实机使用试验情况。
补充资料：油膜轴承油
分子式：
分子量：
CAS号：
性质：为抗氧防锈型润滑油。具有良好的粘温性能、抗氧化性、防锈性及抗泡沫性等。目前最重要为21号油膜轴承油，适用于轧钢机的动压、静压、动静压油膜轴承，也可用于低速、重负荷大型机械的滑动轴承。以原油经过常减压蒸馏、丙烷脱沥青、深度溶剂精制、溶剂脱蜡及补充精制所得润滑组分，再加入抗氧、防锈、抗泡沫添加剂调制而成。
分子量：
CAS号：
性质：为抗氧防锈型润滑油。具有良好的粘温性能、抗氧化性、防锈性及抗泡沫性等。目前最重要为21号油膜轴承油，适用于轧钢机的动压、静压、动静压油膜轴承，也可用于低速、重负荷大型机械的滑动轴承。以原油经过常减压蒸馏、丙烷脱沥青、深度溶剂精制、溶剂脱蜡及补充精制所得润滑组分，再加入抗氧、防锈、抗泡沫添加剂调制而成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条