1) moire interferometry
干涉云纹
1.
Investigated stresses were relieved by cutting specimens along a radial direction, and additional strain fields created by relieving the stresses were measured using moire interferometry.
沿着径向将试件切割,以释放欲测的应力,同时用干涉云纹技术测量由于释放应力而引起的附加应变场。
2.
The residual stress distribution around cold expanded holes was measured by moire interferometry,the influence of reaming and fatigue on the residual stress were investigated experimentally.
应用干涉云纹测量了冷胀孔周残余应力分布，并用实验方法研究了铰孔和疲劳对残余应力的影响。
2) moire interferometry
云纹干涉
1.
The moire interferometry method and moire interferometry-finite element analysis hybrid method have been applied to study interface fracture behaviors of bimaterial specimen which is simulated to porcelain-Fused-to Metal (PFM) restoration.
本文利用云纹干涉法和云纹干涉一有限元混合法,对瓷修复体的模拟双材料模型界面断裂问题进行了实验研究。
2.
The thermal strain of bimetal soldering joint (Cu and Kovar) is analysed with moire interferometry method.
本文采用现代光测力学的云纹干涉法，对铜－可伐焊接件热应变问题进行了实验研究，确定了焊层的热应变特征，结果表明：由于热膨胀系数不匹配、焊层存在复杂的应力状态，它不仅受到焊板材料对它的剪切作用，而且受到纵向拉伸、挤压作用。
3.
Moire interferometry is an optical measurement which is noncontact and has big measuring range, wonderful fringe quality, real-time whole field measurement and high sensitivity, so it can measure the physical quantities about the tiny displacement and strain field of the surface of specimen accurately and effectively.
云纹干涉法是一种具有大量程、极好的条纹质量、非接触测量、实时全场观测和分析的高灵敏度的光学测量方法,能够对物体表面的微小位移和变形场等物理量进行精确有效的测量。
3) moiré interferometry
云纹干涉
1.
This study investigates a new 2-dimensional phase unwrapping method named RIPI (Regional Identification, partition and Integral phase unwrapping method), which is aiming at the problems of "line-draw" and loss of useful data while phase unwrapping in processing moiré interferometry experiment images.
本文针对实验力学云纹干涉图像去包裹处理中容易导致拉线的问题对RIPI(区域识别、划分和积分)去包裹法进行了研究。
2.
The technique of carrier modulation in Moiré interferometry is important in displacement measurement of an object.
在物体变形场的测量中,云纹干涉的载频调制技术有重要作用。
3.
Meanwhile, as a rapidly developing technique of photomechanics, moiré interferometry has attracted attention for its advantages of high sensitivity, excellent contrast, noncontact, real time, whole field, e.
云纹干涉法是一种高灵敏度、高对比度、非接触、实时观测、全场分析的光测力学实验技术；压电陶瓷智能结构以其力电耦合性强、线性控制、高灵敏低迟滞等优点在军工、民用、科研领域都得以广泛应用。
4) moire interferometry
云纹干涉法
1.
Study of creep deformation of metal materials with moire interferometry;
金属材料高温蠕变变形的云纹干涉法实验研究
2.
Thermal deformation measurement of solder joints in surface mounted technique components using Moire interferometry;
表面封装技术组件焊点热变形的云纹干涉法研究
5) Moiré interferometry
云纹干涉法
1.
It is mainly about using the wave front interference principle of Moiré interferometry analyzed the possibility of non-contact measuring elastic modulus and Poisson ratio for high temperature materials by Moiré interferometry and the types of grating specimers of Moiré interferometry in high temperatures.
运用云纹干涉法的波前干涉原理 ,分析激光云纹非接触测量高温材料弹性模量和泊松比的可行性 ,以及高温云纹干涉法试件光栅的类型 ,通过高温云纹干涉测试技术应用和大量的航空高温材料测试 ,解决了材料高温弹性模量和泊松比测试的难题 ,并总结出一套完整的测试方
2.
This paper proposes a method where displacement data measured by moiré interferometry instead of the strain information are used, and finite element method was used to establish the relationship between the displacement and the residual stress.
本文提出用云纹干涉法测量的位移信息代替应变片测量的应变信息来确定残余应力,用有限元建立位移与残余应力之间的关系。
3.
A combined method of moiré interferometry and incremental hole drilling was conducted to study non uniform residual stresses,calculation formula and the experimental technique were presented.
该方法由云纹干涉法测量钻孔释放的位移条纹 ,通过确定孔边待测区域内三个测量点的条纹值 ,可直接得到该区域内的残余应力。
6) Moiré intervention method
几何云纹干涉
补充资料：“张成造”剔犀云纹盘
“张成造”剔犀云纹盘
张成以制造剔红器最得名，负誉海内外，但剔犀器却稀见无多。从此件具款的剔犀圆盘可知张成不仅是剔红高手，剔犀技巧也精湛至极，此盘为研究元代剔犀工艺提供了可靠而精美的实例。
盘木胎黑漆，内外均雕云纹，堆漆甚厚，晶莹照人，刻工圆润，在黝黑峻深的刀口断面露出朱漆四道，是《髹饰录》中所谓“乌间朱线”的作法。盘底黑漆浮躁，显然曾经重髹饰，正中署楷书填金“乾隆年制”四字款，为后髹底漆时所加刻。近足边缘处有针划“张成造”三字细款，此为张成惯用的署款方法。此盘漆色和刀工均与现藏于安徽省博物馆的“张成造”剔犀云纹盒如出一辙，系张成作品无疑，原款应为后髹底漆时所覆盖。
“张成造”剔犀云纹盘，元，高3.3cm，口径19.2cm。
注:刻工-雕漆主要工艺之一，又称雕工。即先在器物上髹漆若干层后，再凭漆之厚度来雕刻花纹。
《髹饰录》-我国现存唯一的一部古代漆工专著，明代隆庆年间（1567—1572年）安徽新安平沙黄成所著。全书分乾、坤两集，共十八章一百八十六条。《乾集》讲制造方法、原料、工具及漆工的禁忌；《坤集》讲漆器分类及各个品种的形态。这是一部专业性很强的工具书，为古代漆器的定名和分类提供了可靠的依据。
乌间朱线-漆器工艺用语。指髹漆时由于黑色漆层较厚，红色漆层较薄，在刀口断面处可见黑色漆层中夹杂的红色漆层似一条红线。
剔红-雕漆品种之一，又名“雕红漆”或“红雕漆”。此技法成熟于宋元时期，发展于明清两代。明黄成《髹饰录·坤集·雕镂第十·剔红》中写道：“剔红，即雕红漆也。……宋元之制，藏锋清楚，隐起圆滑，纤细精致。”其法常以木灰、金属为胎，在胎骨上层层髹红漆，少则八九十层，多达一二百层，至相当的厚度，待半干时描上画稿，然后再雕刻花纹。一般以锦纹为地，花纹隐起，华美富丽。根据漆色的不同，有剔红、剔黄、剔绿、剔黑、剔彩、剔犀之分，其中以剔红器最多见。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。