1) micro-moire interferometry
显微云纹干涉
2) Micro-multiplicative moire interferometry
显微倍增云纹干涉法
3) moire interferometry
干涉云纹
1.
Investigated stresses were relieved by cutting specimens along a radial direction, and additional strain fields created by relieving the stresses were measured using moire interferometry.
沿着径向将试件切割,以释放欲测的应力,同时用干涉云纹技术测量由于释放应力而引起的附加应变场。
2.
The residual stress distribution around cold expanded holes was measured by moire interferometry,the influence of reaming and fatigue on the residual stress were investigated experimentally.
应用干涉云纹测量了冷胀孔周残余应力分布，并用实验方法研究了铰孔和疲劳对残余应力的影响。
4) moire interferometry
云纹干涉
1.
The moire interferometry method and moire interferometry-finite element analysis hybrid method have been applied to study interface fracture behaviors of bimaterial specimen which is simulated to porcelain-Fused-to Metal (PFM) restoration.
本文利用云纹干涉法和云纹干涉一有限元混合法,对瓷修复体的模拟双材料模型界面断裂问题进行了实验研究。
2.
The thermal strain of bimetal soldering joint (Cu and Kovar) is analysed with moire interferometry method.
本文采用现代光测力学的云纹干涉法，对铜－可伐焊接件热应变问题进行了实验研究，确定了焊层的热应变特征，结果表明：由于热膨胀系数不匹配、焊层存在复杂的应力状态，它不仅受到焊板材料对它的剪切作用，而且受到纵向拉伸、挤压作用。
3.
Moire interferometry is an optical measurement which is noncontact and has big measuring range, wonderful fringe quality, real-time whole field measurement and high sensitivity, so it can measure the physical quantities about the tiny displacement and strain field of the surface of specimen accurately and effectively.
云纹干涉法是一种具有大量程、极好的条纹质量、非接触测量、实时全场观测和分析的高灵敏度的光学测量方法,能够对物体表面的微小位移和变形场等物理量进行精确有效的测量。
5) moiré interferometry
云纹干涉
1.
This study investigates a new 2-dimensional phase unwrapping method named RIPI (Regional Identification, partition and Integral phase unwrapping method), which is aiming at the problems of "line-draw" and loss of useful data while phase unwrapping in processing moiré interferometry experiment images.
本文针对实验力学云纹干涉图像去包裹处理中容易导致拉线的问题对RIPI(区域识别、划分和积分)去包裹法进行了研究。
2.
The technique of carrier modulation in Moiré interferometry is important in displacement measurement of an object.
在物体变形场的测量中,云纹干涉的载频调制技术有重要作用。
3.
Meanwhile, as a rapidly developing technique of photomechanics, moiré interferometry has attracted attention for its advantages of high sensitivity, excellent contrast, noncontact, real time, whole field, e.
云纹干涉法是一种高灵敏度、高对比度、非接触、实时观测、全场分析的光测力学实验技术；压电陶瓷智能结构以其力电耦合性强、线性控制、高灵敏低迟滞等优点在军工、民用、科研领域都得以广泛应用。
6) micro interference
显微干涉
1.
In this paper, the grating′s ±1 order diffractive beams of the object′s measured surface are interfered each other by using the micro interference system.
采用显微干涉光路，使被测物体表面光栅的±１级衍射光相互干涉，用显微ＣＣＤ图象采集系统采集干涉后形成的倍增光栅，利用微网格法原理和信息转换技术提取每一幅倍增光栅图象的几何特征，确定被测物体表面的应变。
2.
By using a micro interference system, the surface gratings ±1 order diffractive beams become interfered with each other, and the multiplier grating caused by the interference is recorded by a micro CCD image gathering system.
提出采用显微干涉光路，使被测曲面上光栅的±１ 级衍射光相互干涉，用显微ＣＣＤ图象采集系统采集干涉后形成的倍增光栅，利用微网格法原理和信息转换技术提取每一幅图的几何特征，确定被测物体表面的应变。
补充资料：高分辨电子显微镜(见高分辨电子显微术)
高分辨电子显微镜(见高分辨电子显微术)
high resolution electron microscope
高分辨电子显微镜high resolution eleetronmieroseope见高分辫电子显微术。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条