1)  rubber foam
发泡胶料
1.
Effective factors on curing characteristics of silicone rubber foam;
结果表明 ,活性剂 (氧化锌晶须和N ,N′ 间亚苯基双马来酰亚胺 )能缩短发泡胶料的高温正硫化时间 ,但对发泡胶料的低温硫化促进作用不明显 ;发泡胶料在室温存放过程中有缓慢硫化的趋势 ,室温短时间 (5d内 )存放不会影响发泡胶料的最终硫化效果 ;球形成孔剂表面滞留的处理剂会对发泡胶料的硫化产生负作
2)  foaming
发泡
1.
Microscopic structure and properties of foaming wood-based composites;
木基发泡复合材料微观构造及性能研究
2.
Foamed ethylene-propylene-diene rubber/polypropylene thermoplastic vulcanizate prepared by chemical foaming Ⅰ. Extrusion processing parameters;
化学发泡法制备发泡三元乙丙橡胶/聚丙烯热塑性硫化胶 Ⅰ.挤出工艺参数
3.
Study on Rotational Foaming Molding of Liquid Reactive Resin;
液态反应树脂成型旋转模塑发泡工艺实验研究
3)  blowing
发泡
1.
Effects from blowing agents on adsorption and desorption performance of zeolite;
发泡剂对沸石分子筛吸附/脱附性能的影响
2.
The blowing agents ,polyols and isocyanates are discussed.
概述了聚氨酯泡沫的合成和改性,论述了合成所用发泡剂、多元醇、异氰酸酯体系,介绍了颗粒填充改性、纤维增强改性、阻燃改性、互穿聚合物网络改性,并提出了今后聚氨酯泡沫研究开发的方向。
3.
Conventional blowing technology for phenolic resin entailed addition of some aids such as curing agent and foam stabilizer into phenolic resin,and its foaming process was heated in a range of 60 to 90℃.
传统酚醛树脂发泡技术,需要在酚醛树脂中分别加入固化剂、稳泡剂等一系列助剂,且需要在加热条件下才能够进行发泡。
4)  foam
发泡
1.
Research progress of super light foamed cross-linking EVA materials;
超轻EVA交联发泡材料的研究进展
2.
Study on properties of foaming bio-fiber composites;
生物质纤维基发泡复合材料性能研究
3.
Preparation of lignin/LDPE-EVA composition and foam;
木质素/LDPE-EVA复合材料及其发泡材料的制备
5)  Frothing
发泡
1.
A study on preparation of nano-sized zirconia material by uniform precipitation-frothing process;
均相沉淀-发泡法制备纳米氧化锆材料的研究
2.
On the basis of the former documents, the essay has made further scientific research on the frothing technique of phenodic resin foam ,found the frothing agent-dichloro methane that substituted for chlorofluoro - methane, met the needs of environmental protection and made scientific research on a series of frothing techniques .
该文在前期文献的基础上，对酚醛泡沫塑料的发泡技术作了进一步的研究，找到了替代氯氟烃的发泡剂二氯甲烷，满足了环保的要求，并相应地对一整套发泡技术进行了研究。
6)  foamed
发泡
1.
Structure and properties of speciality PS resin for foamed sheet;
挤出法PS发泡板材专用树脂的结构与性能
2.
The status quo and development of foamed sole material;
发泡鞋底材料研究现状及发展趋势
3.
Extrusion technique and application of rigid PVC foamed products;
硬质PVC发泡制品的挤出技术及应用
参考词条
补充资料：可发泡热熔胶
分子式：
CAS号：

性质：热熔胶的一种。在热熔胶加热熔融时，使用特殊的发泡型涂胶器机械混合N2，涂布后立刻使胶发泡，或者利用化学分解反应使胶层含有气泡。发泡热熔胶有许多优点，如胶的露置时间长，固化时间短，胶层较薄，密封效果好，可防止热敏材料变形，能密封间隙大的部件，胶层有绝热与缓冲作用，在衬垫和密封应用方面有前途。发泡热熔胶的基料有乙烯-醋酸乙烯共聚体、聚酯、聚酰胺、合成橡胶、烯烃类等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。