1) Acrylonitrile-butadiene rubber powder
羧基丁腈粉末橡胶
2) powdered nitrile rubber
粉末丁腈橡胶
1.
Aging properties of powdered nitrile rubber filled with high abrasion furnace black;
高耐磨炉黑填充型粉末丁腈橡胶硫化胶的老化性能
2.
Preparation and properties of high abrasion fine furnace black filled powdered nitrile rubber;
高耐磨炉黑填充粉末丁腈橡胶的制备及性能
3) PNBR
粉末丁腈橡胶
1.
Application of PNBR and Elvaloy in soft PVC;
粉末丁腈橡胶和Elvaloy在软质PVC中的应用
2.
A PVC/PNBR TPE was prepared based on PVC and powdered NBR(PNBR) using magnesium hydroxide(MH) as flame retardant,and the influence of the flame-retardant synergists,such as diantimony trioxide(Sb_2O_3),zinc borate(ZB),ammonium heptomolybdate(AOM),zinc oxide(ZnO) and manganese dioxide(MnO_2) on the properties of above TPE was investigated.
以PVC和粉末丁腈橡胶(PNBR)为主体材料,氢氧化镁为阻燃剂,制备PVC/PNBR共混型热塑性弹性体,研究阻燃协效剂三氧化二锑、硼酸锌、七钼酸铵、氧化锌和二氧化锰对弹性体性能的影响。
3.
The effect of compound curing agents of phenol-formaldehyde resin and SnCl 2·2H 2O on the mechanical properties of the powder nitrile-butadiene rubber (PNBR)/polyvinyl chloride of high degree of polymerization(HPVC) thermoplastic elastomers was investigated by even designed method.
运用均匀设计方法考察了酚醛树脂和氯化亚锡复合硫化剂对粉末丁腈橡胶 (PNBR) /高聚合度聚氯乙烯(HPVC)热塑性弹性体力学性能的影响。
4) powdered acrylonitrile-butadiene rubber
粉末丁腈橡胶
1.
Industrial test of powdered acrylonitrile-butadiene rubber DN 214;
粉末丁腈橡胶DN214的工业试验
2.
Based upon the reviews related to the raw materials, productive methods, applying development of powdered acrylonitrile-butadiene rubber, the importance and essentiality of exploitation and production of a new modified pre-crosslinking PDN214 were pointed out in this thesis.
在对粉末丁腈橡胶生产用原材料、生产方法、生产工艺及应用进展综合分析的基础上，针对市场需求，提出了一种用于材料改性且部分交联的新型粉末丁腈橡胶PDN214的开发和工业化生产研究选题。
5) carboxyl nitrile rubber
羧基丁腈橡胶
1.
Preparation of powdered carboxyl nitrile rubber/polyvinyl chloride blend;
粉末羧基丁腈橡胶/聚氯乙烯共混胶的研制
2.
In this paper,we choose carboxyl nitrile rubber,polysulfide rubber and hydroxyl polysiloxane as toughners and evaluate the effect of toughened epoxy resin with impact strength,bend strength and tensile shear strength.
以羧基丁腈橡胶、聚硫橡胶和羟基聚硅氧烷为增韧剂,以冲击强度、弯曲强度和拉伸剪切强度来评价环氧树脂的增韧效果。
6) carboxylated nitrile rubber
羧基丁腈橡胶
1.
Vulcanization properties of carboxylated nitrile rubber;
羧基丁腈橡胶的硫化性能
2.
Microphase structure and dynamic mechanical properties of carboxylated nitrile rubber-based damping composites
羧基丁腈橡胶基阻尼复合材料的相态结构及动态力学性能
3.
The blends of chlorosulfonated polyethylene(CSM)and carboxylated nitrile rubber(XNBR) could be vulcanized during molding at 185 ℃× 60 min in the absence of any vulcanizing agent.
在没有任何硫化剂的条件下，氯磺化聚乙烯（ＣＳＭ）和羧基丁腈橡胶（ＸＮＢＲ）的共混物（质量比１∶１）能在１８５℃×６０ｍｉｎ下模压硫化。
补充资料：羧基氯丁橡胶
分子式：
CAS号：
性质：羧基化的氯丁二烯橡胶。分AF型和AJ型两种。AF型为非结晶性羧基化氯丁二烯橡胶，门尼黏度50左右，不溶于有机溶剂，塑炼效果不大，适用于配制室温硫化或耐热胶黏剂。AJ型为羧基化氯丁二烯橡胶，可用烷基硫醇、二硫化秋兰姆、三乙烯二胺等塑解剂进行塑化，抗结晶性、耐热性好，凝聚力和胶接强度高，可用金属氧化物硫化。适用于配制压敏型或单组分胶黏剂。
CAS号：
性质：羧基化的氯丁二烯橡胶。分AF型和AJ型两种。AF型为非结晶性羧基化氯丁二烯橡胶，门尼黏度50左右，不溶于有机溶剂，塑炼效果不大，适用于配制室温硫化或耐热胶黏剂。AJ型为羧基化氯丁二烯橡胶，可用烷基硫醇、二硫化秋兰姆、三乙烯二胺等塑解剂进行塑化，抗结晶性、耐热性好，凝聚力和胶接强度高，可用金属氧化物硫化。适用于配制压敏型或单组分胶黏剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条