1) acrylonitrile butadiene rubber powder
丁腈橡胶粉
1.
The material of high-powered camion brake band lining has been prepared by the filter of prescriptions and the study of various raw materials, rubber additive and the regulator of the frictional capacity, with the powder of acrylonitrile butadiene rubber powder and cashew nut oil modified resin as modified additive.
以丁腈橡胶粉和腰果油改性酚醛树脂为改性剂,通过对多种原料、橡胶助剂、摩擦性能调节剂的研究和配方筛选,制得高性能载重汽车刹车片内衬材料。
2) powdered nitrile rubber
粉末丁腈橡胶
1.
Aging properties of powdered nitrile rubber filled with high abrasion furnace black;
高耐磨炉黑填充型粉末丁腈橡胶硫化胶的老化性能
2.
Preparation and properties of high abrasion fine furnace black filled powdered nitrile rubber;
高耐磨炉黑填充粉末丁腈橡胶的制备及性能
3) PNBR
粉末丁腈橡胶
1.
Application of PNBR and Elvaloy in soft PVC;
粉末丁腈橡胶和Elvaloy在软质PVC中的应用
2.
A PVC/PNBR TPE was prepared based on PVC and powdered NBR(PNBR) using magnesium hydroxide(MH) as flame retardant,and the influence of the flame-retardant synergists,such as diantimony trioxide(Sb_2O_3),zinc borate(ZB),ammonium heptomolybdate(AOM),zinc oxide(ZnO) and manganese dioxide(MnO_2) on the properties of above TPE was investigated.
以PVC和粉末丁腈橡胶(PNBR)为主体材料,氢氧化镁为阻燃剂,制备PVC/PNBR共混型热塑性弹性体,研究阻燃协效剂三氧化二锑、硼酸锌、七钼酸铵、氧化锌和二氧化锰对弹性体性能的影响。
3.
The effect of compound curing agents of phenol-formaldehyde resin and SnCl 2·2H 2O on the mechanical properties of the powder nitrile-butadiene rubber (PNBR)/polyvinyl chloride of high degree of polymerization(HPVC) thermoplastic elastomers was investigated by even designed method.
运用均匀设计方法考察了酚醛树脂和氯化亚锡复合硫化剂对粉末丁腈橡胶 (PNBR) /高聚合度聚氯乙烯(HPVC)热塑性弹性体力学性能的影响。
4) powdered acrylonitrile-butadiene rubber
粉末丁腈橡胶
1.
Industrial test of powdered acrylonitrile-butadiene rubber DN 214;
粉末丁腈橡胶DN214的工业试验
2.
Based upon the reviews related to the raw materials, productive methods, applying development of powdered acrylonitrile-butadiene rubber, the importance and essentiality of exploitation and production of a new modified pre-crosslinking PDN214 were pointed out in this thesis.
在对粉末丁腈橡胶生产用原材料、生产方法、生产工艺及应用进展综合分析的基础上,针对市场需求,提出了一种用于材料改性且部分交联的新型粉末丁腈橡胶PDN214的开发和工业化生产研究选题。
5) butadiene-acrylonitrile rubber
丁腈橡胶
1.
Preparation of powdered butadiene-acrylonitrile rubber by coagulation;
用凝聚法制备粉末丁腈橡胶
2.
Morphology and properties of fluoroelastomer/butadiene-acrylonitrile rubber blends;
氟橡胶/丁腈橡胶共混物的相态结构及性能
3.
Preparation and Industrial Enlargement of a Particular Kind of Butadiene-acrylonitrile Rubber;
一种特种丁腈橡胶的制备及工业放大
6) nitrile rubber
丁腈橡胶
1.
Structrue and properties of hydrogenated nitrile rubber;
氢化丁腈橡胶的结构与性能
2.
Compression characteristics of polyester short fiber/nitrile rubber vulcanizates;
聚酯短纤维增强丁腈橡胶硫化胶的压缩性能
3.
Properties of nitrile rubber/nano-calcium carbonate modified with borate coupling agent composites;
丁腈橡胶/硼酸酯偶联剂改性纳米碳酸钙复合材料的性能
补充资料:丁腈橡胶改性酚醛模塑粉
分子式:
CAS号:
性质:将丁腈橡胶塑炼,再与酚醛树脂、木粉或矿物填料、固化剂、润滑剂混合,经辊压、粉碎而成丁腈橡胶改性酚醛模塑粉,用于制造嵌有金属配件的复杂制件,以及适宜于湿热条件下工作的机电产品的绝缘结构件。
CAS号:
性质:将丁腈橡胶塑炼,再与酚醛树脂、木粉或矿物填料、固化剂、润滑剂混合,经辊压、粉碎而成丁腈橡胶改性酚醛模塑粉,用于制造嵌有金属配件的复杂制件,以及适宜于湿热条件下工作的机电产品的绝缘结构件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条