1) machinable glass-ceramic
可切削玻璃陶瓷
1.
In CaO-MgO-Al_2O_3-SiO_2-F system, the effect of microstructure of the new-type fluorophlogopite-Ca machinable glass-ceramic on its properties was investigated.
在CaO-MgO-Al_2O_3 -SiO_2 -F系新型钙云母可切削玻璃陶瓷体系中,研究分析了不同显微结构对性能的影响。
2.
The SCS coefficient, and V～K1 curve for a machinable glass-ceramic and the original glass were made in water and air by using the improved indentation me.
本文将Ｇｕｐｔａ等人提出的用压痕实验来测定脆性材料应力腐蚀指数ｎ的方法［１］进行了改进，使其可以直接测定压痕径向裂纹在压痕塑性区残余应力驱动下非平衡扩展的Ｖ－Ｋ１关系曲线，并用这一方法对一种可切削玻璃陶瓷及其原始玻璃，分别在水及空气介质中的应力腐蚀指数ｎ及Ｖ－Ｋ１曲线进行了测定，结果表明，水显著提高裂纹扩展速率，使Ｖ－Ｋ１曲线左移，ｎ值下降，而结晶化则起相反作用。
2) machinable ceramics
可切削陶瓷
1.
The major feature of machinable ceramics is good cutability with the CAD/CAM technique.
陶瓷修复体因具有良好的生物相容性和美学性能,在临床上得到了越来越广泛的应用,尤其是计算机辅助设计与辅助制作(CAD/CAM)技术的开创性引入使口腔固定修复设计和制作技术发生了革命性变化,而可切削陶瓷材料不仅为CAD/CAM技术提供了材料基础,更是多样化的CAD/CAM发展的原动力。
2.
Nowadays,in clinic,machinable ceramics are used from fledspar which has low flexural strength to high flexural strength zirconia,which have gradually realized making restoration automatically from inlay,anterior single crown to posterior fixed bridge.
而现应用于临床中的可切削陶瓷材料,从抗弯强度低的长石类可切削材料发展到抗弯强度高的氧化锆类可切削材料,逐步实现了从嵌体、前牙单冠到后牙固定桥修复体的制作。
3.
Objective:To evaluate the shear bond strength of silane coupling agent to VITA MarkⅡmachinable ceramics.
目的:比较硅烷偶联剂对VITA Mark Ⅱ可切削陶瓷的粘结强度的影响。
3) Vita mark Ⅱ machinable ceramics
Vita markⅡ可切削陶瓷
5) machinable ceramic Vita Mark II
可切削加工陶瓷
1.
Purpose: The investigation of the wear resistance of machinable ceramic Vita Mark II was to consider weather the machinable ceramic Vita Mark II was suitable to clinic through comparing the wear resistance of machinable ceramic Vita Mark II with other traditional porcelains and natural dentition.
实验目的：研究可切削加工陶瓷Vita MarkⅡ的耐磨性的实验，旨在通过比较可切削加工陶瓷Vita MarkⅡ与口腔临床常用的传统烤瓷修复材料和牙釉质的耐磨程度有无差异，从耐磨性方面来评定可切削加工陶瓷Vita MarkⅡ应用于口腔临床的可行性。
补充资料：玻璃陶瓷(见微晶玻璃)
玻璃陶瓷(见微晶玻璃)
glass ceramics
玻璃陶瓷glass eeramies见微晶玻璃。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条