1) glass/ceramic
玻璃/陶瓷
1.
The material can be divided into two kinds:glass/ceramic and glass-ceramics.
LTCC基板材料可分为两大类:玻璃/陶瓷和微晶玻璃。
2) glass ceramic
玻璃陶瓷
1.
Effect of heat treatment on fracture toughness of dental glass ceramic;
晶化热处理对牙用玻璃陶瓷断裂韧性的影响
2.
The static fatigue behaviors of unidirectional short fiber reinforced glass ceramic matrix composites under different medium were investigated.
研究了不同介质中单向短纤维增强玻璃陶瓷基复合材料的静疲劳行为 。
3.
The stress corrosion exponent of a machinable glass ceramic is measured in water and air.
研究压痕径向裂纹在压痕塑性区残余应力作用下的扩展特性，分别测定一种可切削玻璃陶瓷在水、空气中的应力腐蚀指数ｎ。
3) glass-ceramics
玻璃陶瓷
1.
Crystallization and mechanical properties of high strength α-cordierite glass-ceramics;
高强度α-堇青石基玻璃陶瓷的析晶与力学性能
2.
Effect of crystallization temperature on microstructure and performance of cordierite glass-ceramics;
晶化温度对堇青石玻璃陶瓷结构及性能的影响
3.
Crystallization behavior study on the Li_2O-Al_2O_3-SiO_2 system glass-ceramics;
锂铝硅系玻璃陶瓷晶化行为研究
4) glass-ceramic
玻璃陶瓷
1.
The Crystallization Behavior of Glass-Ceramic Containing TiO_2 and ZrO_2 as Composite Nucleants;
TiO_2和ZrO_2复合晶核剂对玻璃陶瓷晶化行为的影响
2.
Effect of rare earth CeO_2 added on crystallization and properties of a glass-ceramic;
稀土氧化铈对玻璃陶瓷晶化及性能的影响
3.
Study on the crystallization action of the glass-ceramic with good abrasion resistance;
耐磨铝硅酸盐玻璃陶瓷晶化行为研究
5) glass ceramics
玻璃陶瓷
1.
Influence of annealing processes on phase-separation and crystallization in glass ceramics system SiO_2-Al_2O_3-MgO-F;
退火工艺对SiO_2-Al_2O_3-MgO-F系玻璃陶瓷分相和析晶的影响
2.
Effect of chopped carbon fiber on the mechanical properties of Li_2O-Al_2O_3-SiO_2 glass ceramics;
短切碳纤维对玻璃陶瓷力学性能的影响
3.
Biocompatibility evaluation and preparation of thermocompression founding glass ceramics;
热压铸玻璃陶瓷的研制和生物学评价
6) glass-ceramics
玻璃-陶瓷
1.
Upconversion luminescence of a transparent nanometer structure based Er~(3+) ion doped LaF_3-SiO_2 glass-ceramics;
Er~(3+)离子掺杂透明的LaF_3-SiO_2纳米玻璃-陶瓷的上转换发光
2.
Degradation of failure stress(σ_f)which existed in the high stress rate(σ)region in dynamic fatigue test(constant-stressing-rate test)for Y-TZP ceramics and a machinable glass-ceramics were analysed.
通过对相变增韧陶瓷及一种可切削玻璃－陶瓷动态疲劳（恒应力速率）试验中高应力速率区断裂应力下降现象的理论分析，发现这种现象与材料的阻力特性（Ｒ－ｃｕｒｖｅ）密切相关。
补充资料：A-W生物活性玻璃陶瓷
分子式：
CAS号：
性质：含有磷灰石和硅灰石两种结晶相的特定组成的玻璃陶瓷。在A-W微晶下班中，磷灰石和硅灰石结晶尺寸约为0.1～0.5μm，呈弥散分布。由于针状的硅灰石微晶阻止了微裂纹传播，使其弯曲强度和断裂韧性大大提高；而磷灰石微晶赋予其生物活性使能与自然骨形成骨键合，其界面结合强度达13MPa。已被应用于骨缺损修复，以及人工关节、人工齿根、颅骨、颌骨等修复体。
CAS号：
性质：含有磷灰石和硅灰石两种结晶相的特定组成的玻璃陶瓷。在A-W微晶下班中，磷灰石和硅灰石结晶尺寸约为0.1～0.5μm，呈弥散分布。由于针状的硅灰石微晶阻止了微裂纹传播，使其弯曲强度和断裂韧性大大提高；而磷灰石微晶赋予其生物活性使能与自然骨形成骨键合，其界面结合强度达13MPa。已被应用于骨缺损修复，以及人工关节、人工齿根、颅骨、颌骨等修复体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条