1) glass cutting
玻璃切削
1.
The influences of cutting parameters on cutting force and its fractal dimension, surface roughness on the Fractal Theory during glass cutting is presented.
基于分形理论研究了玻璃切削时不同切削参数对切削力及其分形维数以及表面粗糙度的影响。
2.
More and more attention is paid to glass cutting because of high efficiency,low cost and precise glass parts with various shapes.
玻璃在各个尖端科技中的应用越来越广泛 ,对其加工精度的要求也愈来愈高 ,玻璃切削因能高效、低成本获得各种形状的精密玻璃零件而日益受到重视 。
3.
A survey on glass crack initiation and propagation, current status of glass cutting and recent progress, research way of this technology is presented in this paper.
本文综述了玻璃裂纹产生和扩展、玻璃切削国内外研究现状及其取得的新进展,并对未来的发展方向作了简要阐述。
2) machinable glass-ceramic
可切削玻璃陶瓷
1.
In CaO-MgO-Al_2O_3-SiO_2-F system, the effect of microstructure of the new-type fluorophlogopite-Ca machinable glass-ceramic on its properties was investigated.
在CaO-MgO-Al_2O_3 -SiO_2 -F系新型钙云母可切削玻璃陶瓷体系中,研究分析了不同显微结构对性能的影响。
2.
The SCS coefficient, and V～K1 curve for a machinable glass-ceramic and the original glass were made in water and air by using the improved indentation me.
本文将Ｇｕｐｔａ等人提出的用压痕实验来测定脆性材料应力腐蚀指数ｎ的方法［１］进行了改进，使其可以直接测定压痕径向裂纹在压痕塑性区残余应力驱动下非平衡扩展的Ｖ－Ｋ１关系曲线，并用这一方法对一种可切削玻璃陶瓷及其原始玻璃，分别在水及空气介质中的应力腐蚀指数ｎ及Ｖ－Ｋ１曲线进行了测定，结果表明，水显著提高裂纹扩展速率，使Ｖ－Ｋ１曲线左移，ｎ值下降，而结晶化则起相反作用。
3) machinable glass-ceramics
可切削微晶玻璃
1.
Bioactive machinable glass-ceramics are a new group of biomaterials that have drawn much attention in recent years.
可切削生物活性微晶玻璃是近年来引人注目的一种生物材料,本文综述了可切削微晶玻璃的组成,结构,制备工艺,组成特性及研究状况。
2.
Machinable glass-ceramics were fabricated based on the SiO_2-MgO-Al_2O_3-K_2O-Na_2O-F system by sintering.
可切削微晶玻璃是近年来发展的一种新型微晶玻璃，除具备一般微晶玻璃共有的优异性能，又具有独特的可切削加工性能，能够采用加工金属的工具进行切削加工，其工程应用前景和发展领域十分广阔。
4) glass cutting
玻璃切割
1.
Design and implement of glass cutting system;
玻璃切割系统的设计与实现
2.
This paper presents a rear cutter scheme for glass cutting manipulator to avoid force control of cutter.
本文针对玻璃切割机器人的工作特点,采用拖后刀轮设计,巧妙地避免了对刀头的力控制,在保证切割精度的前提下简化了系统设计。
3.
Experimentation verify the good stability and conformable precision in glass cutting etc.
实验表明该机器人切割系统工作稳定,满足玻璃切割等行业的加工要求。
5) glass incision
玻璃切割
1.
Treatment of NURBS in the system of glass incision;
NURBS在平面异形玻璃切割系统中的应用
2.
Optimization arithmetic of intelligent glass incision machine;
一种智能化玻璃切割机优化算法
6) glass cutting table
玻璃切桌
1.
The author proposed six corrective measures directing towards four issues occurred in glass cutting table and remarkable effect was achieved.
针对过去玻璃切桌存在的4方面问题,提出6条改进措施,取得了显著的效果。
补充资料：锂云母型可切削微晶玻璃
锂云母型可切削微晶玻璃
锂云母型可切削徽晶玻璃 诗培南借稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条