1) casting production
铸钢生产
2) Cast steel
铸钢
1.
Effects of RE/V/Ti multi-modification on grain refinement of high silicon cast steel;
稀土、钒、钛变质处理对高硅铸钢晶粒细化的影响
2.
Study on process of multi-element permeation on cast steel surface;
铸钢表面多元共渗工艺和性能研究
3.
Application of cast-penetrating technology in the cast steel valve;
铸渗技术在铸钢阀门上的应用
3) Casting steel
铸钢
1.
An Analysis on Abnormal Fracture of 12CrNi2MnCu Casting Steel;
12CrNi2MnCu铸钢异常断口分析
2.
The conchoidal fracture in casting steel was studied by means of instrumented impact test, facture analysis and metallographic examination.
采用示波冲击试验、断口分析和金相分析等方法,并结合断裂力学对铸钢中贝壳状断口的形成机理进行了研究。
3.
The microstructure and mechanical properties of the chain guide frame made of imported and home made materials as well as products meta bainited casting steel were investigated by mears of optical microscop (OM)?X ray phase analysis, scanning electron microscopy (SEM) and mechanical testing.
用金相分析、X射线衍射、扫描电镜及力学性能测试分析了进口、国产及准贝氏体铸钢链轨架材质的组织及力学性能。
4) Steel casting
铸钢
1.
The Application of Electric Arc Heating Top in Steel Casting Roll Production;
电弧加热冒口(EAHT)在铸钢轧辊生产中的应用
2.
In this paper,the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right angle test was studied.
通过正交试验 ,研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。
3.
A flexible software with versatile functions was presented,which can be used conveniently in the design of the steel casting process.
开发了具有功能全面、使用方便、适用面广等特点的铸钢件铸造工艺计算机辅助设计软件。
5) high chromium cast steel
高铬铸钢
1.
The laser melting was performed on high chromium cast steel nozzle of power boiler burner.
对电站锅炉燃烧器喷嘴用高铬铸钢材料进行了激光熔凝处理,研究了激光熔凝处理后高铬铸钢表面熔凝层的显微组织、相结构、维氏硬度及耐磨性能。
2.
This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.
本文探讨了热变形高铬铸钢中颗粒状碳化物的形成。
6) cast steel roll
铸钢辊
1.
The plastic limit analysis and parametric design of a hollow cast steel roll with axle sleeve of the high-speed paper machine are studied.
研究了高速纸机中具有闷头的空心铸钢辊结构的塑性极限和参数设计问题。
参考词条
补充资料：JIT准时制生产(及时制生产)
JIT准时制生产(及时制生产)：是应用拉引式生产物流控制原理的方法。在生产系统中任何两个相邻工序即上下工序之间都是供需关系，如何处理这种关系，就是生产物流所要研究的问题。按照传统的生产计划组织生产(包括MRP)，物料根据预定的计划时间由供方向需方逐个工序流动。需求方根据上一工序送来物料的数量和到达时间进一步加工。需求方接受物料完全是被动的，如果出现不可预料的因素，物料可能提前或延迟到达。延迟到达将使生产中断，必须在生产计划中留有余地，以避免这种现象的发生。这样一来，必然存在或多或少、提前到达的现象，从而导致系统中库存量的上升，产生种种库存多余的弊病。JIT的方法改变了传统的思路，由需方起主导作用，需方决定供应物料的品种、数量、到达时间和地点。供方只能按需方的指令(一般用看板)供应物料。送到的物料必须保证质量，无残次品。这种思想就是以需定供，可以大大提高工作效率与经济效益。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。