1) low superheat
低过热度
1.
Coupled Numerical Simulation of Flow Field and Temperature Field of Mold Concasting at Low Superheat by Two Rollers Cooling;
双辊冷却低过热度浇铸结晶器流场和温度场耦合数值模拟
2.
Based on the CFD software,the stable state pouring model of low superheat by two rollers cooling has been established in this paper.
文章基于CFD软件,建立了双辊冷却低过热度稳态浇铸模型,同时选材45#钢,模拟了不同拉速下冷却辊处及结晶器内部钢液的流场、温度场及凝固场分布,并分析了拉速的变化对各场分布的影响。
2) low superheat pouring
低过热度浇注
1.
The semi-solid of ZL101 aluminum alloy is manufactured by low superheat pouring.
采用低过热度浇注技术制备半固态ZL101铝合金,研究了冷却强度、保温时间、浇注温度对铸造显微组织的影响。
2.
The semi-solid AISiTMg alloy slurry with larger size was prepared by the low superheat pouring and traveling-wave electromagnetic stirring in this paper.
用低过热度浇注和弱行波电磁搅拌工艺制备半固态AlSi7Mg合金浆料,研究了浇注温度和搅拌功率对其初生α-Al形貌的影响。
3.
The semi-solid slurry of A356 aluminum alloy was prepared by a method of low superheat pouring and weak traveling-wave electromagnetic stirring and the effects of pouring temperature,stirring power and stirring time on the semi-solid slurry were investigated.
用低过热度浇注和弱行波电磁搅拌工艺制备A356铝合金半固态浆料,研究了浇注温度和搅拌功率等复合工艺参数对A356铝合金的半固态浆料的影响。
3) low superheat casting
低过热度铸造
4) low super heat casting
低过热法
1.
In the first step, billets were made with the method of low super heat casting.
首先采用低过热法制备半固态成形的原始坯料，制定了合理的坯料制备工艺。
5) Low temperature superheater
低温过热器
1.
The thesis adopts the method of site checking,measuring and mark analyzing,associated with analyzing the abrasion feature of boiler,finds out the real reason of low temperature superheater tube leakage and take pertinent precaution measures.
运用现场检查、测量、痕迹分析法,结合锅炉磨损特征分析,找出了低温过热器管泄漏原因,有针对性的采取防范措施。
2.
Through improvement and perfection,this technique has witnessed satisfactory application result on the low temperature superheaters and economiz.
采用燃气冲击波清灰技术是对锅炉尾部受热面清灰的理想措施,经改进与完善,该技术在低温过热器和省煤器上已取得了满意的应用效果,提高了受热面的换热效率和吸热量,清灰效果显著。
3.
Based on analysis of the welding performance of SA106C materials and the rated load condition of low temperature superheater header,this paper finds the cause that the head produce cracks bug.
通过分析SA106C材料的焊接性及锅炉低温过热器联箱运行的工况条件,找出了联箱产生裂纹缺陷的原因,据此,制定了联箱裂纹处理工艺措施,并成功完成了修复。
6) desuperheater
[di:,sjupə'hi:tə]
过热降低器
补充资料：垂体功能过低性肢厚皮病
垂体功能过低性肢厚皮病
病名。亦称肢端缩小综合征。系常染色体显性遗传，亦可为垂体前叶受结核、炎症、肿瘤的影响所致之皮肤结缔组织肥厚，增殖性骨膜炎伴不规则的骨膜骨化，韧带、腱和膜的骨化。多见于男性，青春期后发病。劳动能力下降。面和颅的皮肤增厚、皱纹，皮脂腺分泌增加，手足皮肤增厚、多汗。四肢骨、指和趾增厚，指圆柱状变形、杵状趾。手足仍小或肢端缩小，关节积液 。偶见胡须和阴毛稀少，尿崩，女性型乳房。血钠低，X线检查可见垂体前叶炎症。结核或肿瘤表现。无特殊治疗。经5～10年进展后稳定，不影响生活。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条