1.
Research on Semi-Solid ZL101-Sc Alloy Prepared by Low Superheat Pouring
用低过热度浇注技术制备半固态ZL101-Sc铝合金
2.
Technical and Theoretical Research of Semi-solid Al-30%Si Slurry Prepared by Low Superheat Pouring Low Intensity Electromagnetism Stirring;
低过热度浇注弱电磁搅拌制备半固态Al-30%Si浆料的工艺与理论研究
3.
Study on the Control of Temperature in Continuous Casting Tundish with Low Superheat
低过热度浇铸的连铸中间包温度控制研究
4.
High strength, good volume stability, low thml. Cond.，and can be installed by casting, gunning or ramming.
强度高，烧后线变化小，导热率低，可浇注、喷射、捣打施工。
5.
Clear, one-component, flexible, heat cure epoxy system designed for coil impregnation, and potting applications requiring low viscosity and minimal thermal stress.
透明的单组分加热固化环氧，弹性，专为低粘度、最小热压的灌封浇注要求而设计。
6.
Effect of Heat Treatment Temperature on Properties of Lightweight Castable
热处理温度对轻质浇注料性能的影响
7.
Top pouring is the simplest and cheapest method, but gives poor control over the rate of pouring.
上注法最简单，成本最低，但不好控制浇注速度。
8.
High strength, low linear change and low thermal conductivity. Forming easily, such as casting, gunning, coating, ramming.
强度较高，烧后线变化小，导热率低，施工方便，可浇注、喷射、涂抹或捣打施工。
9.
Effect of Heat Treatment Temperature on Property of Mullite-Bauxite Castable Refractory
热处理温度对莫来石-铝矾土浇注料性能的影响
10.
Effect of Heat Treatment Temperature on Properties of Calcined Flint Clay-Bauxite Castable Refractory
热处理温度对焦宝石-铝矾土浇注料性能的影响
11.
The molten metal may enter the ingot mould in two ways: from the top and from the bottom. Top pouring is the simplest and cheapest method, but gives poor control over the rate of pouring.
钢液注入钢锭模可采用两种方式:上注和下注。上注法最简单，成本最低，但不好控制浇注速度。
12.
Research on the Flow of Aluminum Liquid in the Gating System for Aluminum Alloy Wheel
铝合金轮毂低压铸造过程中铝液在浇注系统中流动的研究
13.
THERMAL CHARACTERISTIC OF CLAY CASTABLE REFRACTORIES AND STUDY AND DESIGN OF ITS FURNACE EXPANSION CRACK
粘土结合浇注料热过程特性及其炉体胀缝板设计研究
14.
Effects of Pouring Temperature on Solidification Behavior of Aluminum Alloy Melt with Electromagnetic Stirring
电磁搅拌铝合金热模浇注温度对其凝固行为的影响
15.
Backing layer castable is noted for low heat conductivity, good quality of being a whole part and good erosion resistance to mental steel.
久衬浇注料整体性好、开裂、热率较低，且具有一定的抗钢水和铁水侵蚀能力。
16.
Adeline steelmaking process
阿德莱熔模铝热离心浇注法
17.
Doctor used to let blood from people to lessen a fever.
过去医生以放血来降低轻热度。
18.
Industrial Trial of Reducing Molten Steel Superheat by Cooling Nozzle
冷却水口降低钢水过热度的工业试验