1) powder NBR
丁腈粉末
1.
We researched the effect of powder NBR on thermal properties and mechanical properties of phenolic resin,including the binder flowability,curing rate,bending strength and Rockwell hardness.
发现添加丁腈粉末能使树脂的固化速度加快,流动性降低,试样弯曲强度和洛氏硬度降低。
2) powdered nitrile rubber
粉末丁腈橡胶
1.
Aging properties of powdered nitrile rubber filled with high abrasion furnace black;
高耐磨炉黑填充型粉末丁腈橡胶硫化胶的老化性能
2.
Preparation and properties of high abrasion fine furnace black filled powdered nitrile rubber;
高耐磨炉黑填充粉末丁腈橡胶的制备及性能
3) PNBR
粉末丁腈橡胶
1.
Application of PNBR and Elvaloy in soft PVC;
粉末丁腈橡胶和Elvaloy在软质PVC中的应用
2.
A PVC/PNBR TPE was prepared based on PVC and powdered NBR(PNBR) using magnesium hydroxide(MH) as flame retardant,and the influence of the flame-retardant synergists,such as diantimony trioxide(Sb_2O_3),zinc borate(ZB),ammonium heptomolybdate(AOM),zinc oxide(ZnO) and manganese dioxide(MnO_2) on the properties of above TPE was investigated.
以PVC和粉末丁腈橡胶(PNBR)为主体材料,氢氧化镁为阻燃剂,制备PVC/PNBR共混型热塑性弹性体,研究阻燃协效剂三氧化二锑、硼酸锌、七钼酸铵、氧化锌和二氧化锰对弹性体性能的影响。
3.
The effect of compound curing agents of phenol-formaldehyde resin and SnCl 2·2H 2O on the mechanical properties of the powder nitrile-butadiene rubber (PNBR)/polyvinyl chloride of high degree of polymerization(HPVC) thermoplastic elastomers was investigated by even designed method.
运用均匀设计方法考察了酚醛树脂和氯化亚锡复合硫化剂对粉末丁腈橡胶 (PNBR) /高聚合度聚氯乙烯(HPVC)热塑性弹性体力学性能的影响。
4) powdered acrylonitrile-butadiene rubber
粉末丁腈橡胶
1.
Industrial test of powdered acrylonitrile-butadiene rubber DN 214;
粉末丁腈橡胶DN214的工业试验
2.
Based upon the reviews related to the raw materials, productive methods, applying development of powdered acrylonitrile-butadiene rubber, the importance and essentiality of exploitation and production of a new modified pre-crosslinking PDN214 were pointed out in this thesis.
在对粉末丁腈橡胶生产用原材料、生产方法、生产工艺及应用进展综合分析的基础上，针对市场需求，提出了一种用于材料改性且部分交联的新型粉末丁腈橡胶PDN214的开发和工业化生产研究选题。
5) New Powder PNBR
新型粉末丁腈橡胶
6) full-vulcanized powder nitrile rubber
全硫化粉末丁腈橡胶
1.
Mechanical properties,rheological behavior and morphology of rigid polyvinyl chloride / full-vulcanized powder nitrile rubber blends were studied.
研究了纳米级全硫化粉末丁腈橡胶(VP-401)对硬质聚氯乙烯(PVC-U)增韧改性材料的力学性能、流变性能及形态结构的影响。
补充资料：粉末丁腈橡胶
分子式：
CAS号：
性质：丁腈橡胶胶乳经喷雾干燥或冷冻后粉碎，可制得的粒径约在0.8mm以下的粉末丁腈橡胶，也可通过胶乳与隔离剂(如有机硅化合物、细粉状聚乙烯)共沉淀而制得。粉末丁腈橡胶的优点是配合方便，混炼时间大量缩短，能耗低，适用于连续加工工艺，特别是压出制品，如胶管、电缆护套、胶板等。粉末丁腈橡胶可用作聚氯乙烯的增塑剂，与聚氯乙烯并用作鞋底，这种并用胶具有一定弹性又有良好的耐油性、耐臭氧和耐磨性，适用作电缆护套、垫圈。
CAS号：
性质：丁腈橡胶胶乳经喷雾干燥或冷冻后粉碎，可制得的粒径约在0.8mm以下的粉末丁腈橡胶，也可通过胶乳与隔离剂(如有机硅化合物、细粉状聚乙烯)共沉淀而制得。粉末丁腈橡胶的优点是配合方便，混炼时间大量缩短，能耗低，适用于连续加工工艺，特别是压出制品，如胶管、电缆护套、胶板等。粉末丁腈橡胶可用作聚氯乙烯的增塑剂，与聚氯乙烯并用作鞋底，这种并用胶具有一定弹性又有良好的耐油性、耐臭氧和耐磨性，适用作电缆护套、垫圈。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条