1) powdered styrene-butadiene rubber
粉末丁苯橡胶
1.
Improvement of centrifugal system in powdered styrene-butadiene rubber unit;
粉末丁苯橡胶装置离心系统的改进
2.
Development of powdered styrene-butadiene rubber 1712 with high Mooney viscosity;
高门尼黏度粉末丁苯橡胶1712工业化技术开发
3.
Properties of dynamic vulcanized general polystyrene/powdered styrene-butadiene rubber blends
动态硫化通用聚苯乙烯/粉末丁苯橡胶共混物的性能
2) powdered SBR
粉末丁苯橡胶
1.
Preparation of Ultrafine Calcium Carbonate/powdered SBR and its Application on PVC;
超细碳酸钙/粉末丁苯橡胶的制备及在PVC中的应用
2.
The powdered SBR with good appearance and fine size of less than 1 mm was prepared by coagulation and appropriate technology.
以自制的阴离子表面活性剂(Coron树脂)为包覆剂,对丁苯胶乳粒子进行包覆,通过凝聚法制得粒径不大于1mm、外观白色、颗粒均匀的粉末丁苯橡胶。
3) SBR powder
粉末丁苯橡胶
1.
The surface of high anti-abrasion carbon black(N330) was modified by some transition-metals or rare earth compounds, effect on the mechanical properties of N330 filled SBR powder vulcanized rubber was investigated.
用过渡金属及稀土化合物对高耐磨炭黑(N330)进行表面改性,探讨提高高耐磨炭黑填充型粉末丁苯橡胶(SBR)硫化胶的力学性能。
5) filled powdered styrene-butadiene rubber
填充型粉末丁苯橡胶
6) nano-powder styrene-butadiene rubber
纳米级丁苯粉末橡胶
1.
The authors prepared a flame retardant system consisting of nano-powder styrene-butadiene rubber (grade VP101) and flame retardant high impact polystyrene(HIPS) and furthermore,studied the influences of VP101\'s content and radiation dosage of cobalt-60 on performance of the system.
制备了纳米级丁苯粉末橡胶(牌号为VP101)/阻燃高抗冲聚苯乙烯(HIPS)体系,研究了w(VP101)和VP101的辐照剂量对阻燃体系的影响结果表明,十溴二苯醚的质量分数为10%和w(VP101)为3%时,阻燃HIPS体系达到UL94 V-0级。
补充资料:粉末丁腈橡胶
分子式:
CAS号:
性质:丁腈橡胶胶乳经喷雾干燥或冷冻后粉碎,可制得的粒径约在0.8mm以下的粉末丁腈橡胶,也可通过胶乳与隔离剂(如有机硅化合物、细粉状聚乙烯)共沉淀而制得。粉末丁腈橡胶的优点是配合方便,混炼时间大量缩短,能耗低,适用于连续加工工艺,特别是压出制品,如胶管、电缆护套、胶板等。粉末丁腈橡胶可用作聚氯乙烯的增塑剂,与聚氯乙烯并用作鞋底,这种并用胶具有一定弹性又有良好的耐油性、耐臭氧和耐磨性,适用作电缆护套、垫圈。
CAS号:
性质:丁腈橡胶胶乳经喷雾干燥或冷冻后粉碎,可制得的粒径约在0.8mm以下的粉末丁腈橡胶,也可通过胶乳与隔离剂(如有机硅化合物、细粉状聚乙烯)共沉淀而制得。粉末丁腈橡胶的优点是配合方便,混炼时间大量缩短,能耗低,适用于连续加工工艺,特别是压出制品,如胶管、电缆护套、胶板等。粉末丁腈橡胶可用作聚氯乙烯的增塑剂,与聚氯乙烯并用作鞋底,这种并用胶具有一定弹性又有良好的耐油性、耐臭氧和耐磨性,适用作电缆护套、垫圈。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条