1)  composite powder
复合导电粉
1.
Carbon nanotube(CNT)/Mica conductice composite powder was prepared by a substrate- induced method.
基体诱导法制备碳纳米管(CNT)/云母复合导电粉,即用聚乙烯醇(PVA)或聚丙烯酰胺(PAM)对云母进行处理,将处理后的云母与CNT分散液混合,使CNT吸附在云母表面。
2)  composite conductive powder
复合导电粉末
1.
Barite-matrix composite conductive powders coated with antimony-doped tin oxide(Sb-SnO_2/BaSO_4,SSB) have been successfully prepared by chemical co-precipitation technology.
以重晶石粉为基体,采用化学共沉淀技术表面包覆锑掺杂二氧化锡制得重晶石基复合导电粉末(SSB)。
2.
The composite conductive powder with titanium dioxide powder covered by SnO_2 and Sb_2O_3 was prepared by chemical coprecipitation technology.
以TiO2为基体,采用化学共沉淀技术制得复合导电粉末。
3.
The prepare process include four part: (1) Composite conductive powder with Titanium dioxide powder covered by SnO_2 and Sb_2O_3 was prepared by the chemical coprecipitation technology.
0,水解温度为60℃、焙烧温度为700℃时得到的复合导电粉末电阻率最低,为88??cm,复合导电粉末的粒径≤200nm。
3)  compound
复合
1.
Technique of compound chemical blockage removal with water-gas pulsating wave;
水气脉冲波复合化学解堵技术
2.
Applied research of compound deplugging by vibration acidization;
振动酸化复合解堵增注技术应用研究
3.
Preparation and properties of bamboo charcoal-chitosan compound sorbent;
竹炭—壳聚糖复合吸附剂的制备及其性能
4)  compounding
复合
1.
Studies were undertaken on the key points in the compounding and processing technology of the juice with carrot and tomato as the major materials,and orthogonal tests were done to get the optimum formulas for carrot and tomato juices.
以胡萝卜、番茄为原料,对其复合制作工艺中的技术要点进行了研究,应用正交试验筛选出了胡萝卜汁和番茄汁的最佳配方,经过反复实验确定了最适合的工艺流程,并对加工过程中维生素C、胡萝卜素的稳定性、影响因素及保护措施进行了探讨。
2.
The modification of aqueous polyurethane dispersion is focused on crosslinking and compounding technologies.
交联改性和复合改性是近年来水性聚氨酯改性方法研究的重点,论述了各种改性技术的基本理论和实施方法。
3.
This paper introduces the investigation and progress on titanium dioxide responding to visiblelight irradiation as a result of doping and compounding.
从纳米TiO2的掺杂和复合两方面,介绍了近年来实现其可见光化的研究进展。
5)  Composite
复合
1.
The Study of Class Ceramics—Ceramics Composite Bora's Technics;
微晶玻璃—陶瓷复合曲面板生产工艺研究
2.
Progress on Synthesizing SiO_2/Polymer Nanocomposite Emulsion;
SiO_2/聚合物纳米复合乳液的合成研究进展
3.
Primary Exploration for PTFE membrane and PET Spunbonded Nonwovens Calendering Composite Process;
热轧复合工艺对PTFE膜和PET纺粘非织造布复合材料性能的影响
6)  complex
复合
1.
Study on complex cationic silicone softer and its application;
复合阳离子型有机硅柔软剂的研制及应用
2.
Nanometer TiO_2 Photocatalyst Complexed by Semiconductor;
半导体复合TiO_2纳米光催化剂
3.
The application of complex and modified in fiber production;
复合改性及其在化纤生产中的应用
参考词条
补充资料：导电功能复合材料
分子式：
CAS号：

性质：以高分子材料为基体，金属、碳素、表面金属化的无机粒子或纤维为导电相的复合材料。按高分子基体材料的不同，可分为导电橡胶、导电塑料及导电涂料。导电复合材料有共同的性质：存在渗滤阈值，导电粒子填充超过阈值后，复合材料电导率就有一跳跃，成为导电材料；电导率随温度上升而下降，并在某一温度值出现导电率剧降现象，即具有正温度系数电阻性质。导电复合材料具有优良的加工性能，柔性，耐腐蚀，低密度，可选择的电导率范围很宽(105～10-10Ω-1cm-1)，价格比较便宜等优点，因而获得广泛应用。主要用于按键接点材料、阻抗发热体、防静电材料、屏蔽材料、电极材料、高压电缆被覆材料、厚膜电阻材料等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。