1) composite emulsion
复合乳液
1.
Study on high inorganic content composite emulsion of SiO_2 sol;
高硅溶胶含量复合乳液的研究
2.
Preparation of polyacrylate-siloxane/nanomontmorillonite composite emulsion;
聚丙烯酸酯-硅氧烷/纳米蒙脱土复合乳液的制备
3.
Preparation and properties of polyvinyl acetate/nanosilica composite emulsion;
聚醋酸乙烯酯/纳米SiO_2复合乳液的制备与性能
2) hybrid emulsion
复合乳液
1.
Preparation and performance of cationic epoxy-acrylate-siloxane hybrid emulsion;
阳离子型环氧-丙烯酸酯-硅氧烷复合乳液的制备与性能
2.
Syntheses and mechanical properties of polyurethane-poly(ethyl acrylate)hybrid emulsions;
聚氨酯-聚丙烯酸酯复合乳液的动态力学性能
3.
Progress of polyurethane/acrylate hybrid emulsion;
聚丙烯酸酯改性聚氨酯复合乳液研究进展
3) composite latex
复合乳液
1.
Preparation of polysiloxane-acrylic composite latex with core-shell structure;
核/壳型聚硅氧烷丙烯酸酯复合乳液的制备
2.
Synthesis and properties of polyacrylate-polyorganosiloxane composite latex;
聚丙烯酸酯-聚有机硅氧烷复合乳液的合成与性能
3.
A new type of nano-SiO_2/acrylic resin composite latex was synthesized by introducing nano- SiO_2 particles formed in-siut from the hydrolysation of tetraethylorthosilicate in the emulsion polymerization of acrylates.
在丙烯酸酯乳液聚合过程中,引入由硅酸乙酯原位水解形成的SiO_2,制备了新型的纳米SiO_2/聚丙烯酸酯复合乳液。
4) compound emulsion
复合乳液
1.
Preparation of compound emulsion of high SiO_2 sol/polyacrylate;
高SiO_2含量硅溶胶/聚丙烯酸酯复合乳液的制备
2.
The waterborne polyurethane-nano TiO_2 compound emulsion was prepared by the reaction of tetrabutyltitanate(TET) with polyester diol,dimethylol propionic acid(DMPA),isophorone diisocyanate(IPDI) based on the principle of sol-gel process.
根据溶胶-凝胶原理,采用聚酯二元醇、异佛尔酮二异氰酸酯(IPD I)、二羟甲基丙酸(DMPA)、钛酸四丁酯(TET)制备了水性聚氨酯-纳米TiO2复合乳液。
3.
It has shown that the PUA compound emulsion prepared with technology of monomer neutralization shows characteristics of better storage stability, good mechanical and water resistance properties, and simple process, lower pollution, and lower cost.
采用种子乳液聚合法制备了聚氨酯 聚丙烯酸酯 (PUA)复合乳液。
5) complex emulsion
复合乳液
1.
Study on complex emulsion coating of nanometer SiO_2/acrylic ester;
纳米SiO_2/聚丙烯酸酯复合乳液涂料的研制
2.
Preparation and influence factors of complex emulsion of polyurethane-polyacrylate with core-shell structure;
核壳型水性聚氨酯-聚丙烯酸酯复合乳液的制备及其影响因素
3.
Preparation and properties of waterborne polyurethane-acrylate complex emulsion cured with hexamethoxy methyl melamine
氨基树脂改性水性聚氨酯-丙烯酸酯复合乳液的制备及性能
6) hybrid miniemulsion
复合细乳液
补充资料：乳液
分子式：
CAS号：
性质：又称乳浊液，乳状液。是由两种（或两种以上）互不相溶（或不完全相溶）的液体构成的两相液态体系。其中一种液体的微细液滴（均0.1μm）均匀分散于另一种液体中，前者称为分散相，后者称为连续相。以水乳液为例，连续相就是水。习惯上将构成分散相的有机液体称作“油（O）”；谓之水包油乳液（O/W）；反之，如连续相为有机液体而分散相是水，则谓之为油包水乳液（W/O）。乳液较不稳定，容易发生相分离现象，必须加入乳化剂。
CAS号：
性质：又称乳浊液，乳状液。是由两种（或两种以上）互不相溶（或不完全相溶）的液体构成的两相液态体系。其中一种液体的微细液滴（均0.1μm）均匀分散于另一种液体中，前者称为分散相，后者称为连续相。以水乳液为例，连续相就是水。习惯上将构成分散相的有机液体称作“油（O）”；谓之水包油乳液（O/W）；反之，如连续相为有机液体而分散相是水，则谓之为油包水乳液（W/O）。乳液较不稳定，容易发生相分离现象，必须加入乳化剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条