1) cold rolled strip
冷轧带钢
1.
Analysis of surface bubbly defects in cold rolled strip;
冷轧带钢表面鼓泡缺陷分析
2.
Optimization of annealing technology for cold rolled strip;
冷轧带钢退火工艺的优化
3.
Online application research on automatic surface quality inspection system for cold rolled strips;
冷轧带钢表面质量自动检测系统的在线应用研究
2) cold rolled strips
冷轧带钢
1.
A new method which uses LVQ neural network in the automatic classification of surface defects for cold rolled strips was presented.
将LVQ神经网络用于冷轧带钢表面缺陷的自动分类中，解决了以往分类方法在多缺陷模式类型情况下耗时多和准确率低的问题。
2.
An on-line surface defect inspection system for cold rolled strips is introduced.
介绍一套目前已在实验室中开发成功的冷轧带钢表面缺陷在线监测系统，该系统用于在线检测和识别冷轧带钢的表面缺陷。
3.
A newly developed system for on - line detection and classification of surface defects of cold rolled strips is introduced.
介绍一套目前正在开发的用于在线检测和识别冷轧带钢表面缺陷的系统,该系统采用面阵CCD摄象头采集带钢表面的图象,并且在硬件结构和软件流程上进行了特殊的设计,以满足系统的实时数据处理要求。
3) cold rolled strip steel
冷轧带钢
1.
Study of the surface cleanness of cold rolled strip steel;
冷轧带钢表面清洁度的研究
2.
The surface quality evaluation of cold rolled strip steel is a complex problem involving many influencing factors among which many different causes of formation of surface defects are possible and the amount,level,position and distribution of surface defects affect differently the surface quality.
冷轧带钢表面质量评价是一个与多种影响因素相关的十分复杂的问题,其中表面缺陷种类繁多,其成因复杂,与之相关的数量、等级、位置、分布特性等不同程度地影响着表面质量。
3.
By adopting the method of BP neural network,the mechanical property for SPCC cold rolled strip steel products has been predicted,and based on the data obtained from orthogonal experiments of chemical composition(C,Si,Mn,P,S,Al) and process parameter(annealing temperature and rolling speed),the prediction value for the network has been obtained by means of the off-line studying method as well.
利用BP神经网络的方法预测SPCC冷轧带钢产品力学性能并以现场得到的化学成分(C、Si、Mn、P、S、Al)和工艺参数(退火温度、轧制速度)正交试验数据为基础,采用离线学习的方法得出网络的预报值。
4) cold rolling strip
冷轧带钢
1.
In order to solve the problem of cold rolling strip surface wrinkles on the uncoiler,the stress distribution of a cold rolling strip on the uncoiler and its influencing factors were investigated by finite element method.
冷轧带钢钢卷在平整机上开卷时,带钢表面有时会出现横折印缺陷。
2.
In order to further raise the cold rolling strip production efficiency and shorten annealing treatment time,the author analyzes the annealing process of hood type furnace and takes measures to optimize the annealing time,excess coefficient K and process atmosphere.
为了进一步提高冷轧带钢产量,缩短退火时间,对罩式退火炉的退火工艺进行了分析,采取措施对退火时间、过剩系数K及过程气氛进行优化。
5) cold-rolled steel strip
冷轧带钢
1.
The process flow becomes more proper, and the surface quality of the cold-rolled steel strip is markedly improved after the renovation.
结合广州金莱冷轧带钢有限公司的生产实际,对平整机张力控制系统进行改造。
2.
The architecture of a new on-line cold-rolled steel strip surface defect inspecting system is proposed, in which the area-array CCD camera imaging,the ge o me trio segmentation and the composition of data from diferent segments are used.
提出一种新型冷轧带钢表面缺陷在线检测系统的体系结构并说明其工作原理。
3.
Through the morket investigation and the major production project ana-lysis, the proposals for developing the high-accuracy cold-rolled steel strip of all kinds bed been put forward.
通过对高精度冷轧带钢的市场调研和重点项目分析，提出对该产品开发工作的建议。
补充资料：宝山钢铁(集团)公司冷轧带钢厂板形仪原理图
宝山钢铁(集团)公司冷轧带钢厂板形仪原理图
宝山钢铁(集团)公司冷轧带钢厂板形仪原理图
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条