1) concave boss
凸柱
1.
It has the features that not only the geometries of the workpiece can be formed,local structures like concave bosses can also be formed in one process step.
板材局部体积成形技术,或称为板材热冲锻成形技术,为近年来提出的一种板材零件成形方法,其特点是板材冲压成形时不但完成板材零件形状的成形,还兼有局部结构的体积成形,例如局部凸柱、凸台、凸筋等结构的成形,适合于成形镁合金、铝合金等金属的成形,尤其适于替代一些电子器件外壳的铸造加工产品。
2) cylinder cam
圆柱凸轮
1.
Study and practice of machining cylinder cam by means of plain work-piece programming;
利用平面工件编程方法加工圆柱凸轮的实践
2.
The three element complex is regarded as a mathematic modeling tool in this paper and it is,directly,used to the profile design of cylinder cam mechanism with a follower of straight-line motion by means of the vector method.
本文以三元复数为数学建模工具,直接运用矢量方法设计圆锥滚子直动从动件圆柱凸轮机构的几何轮廓,将一个复杂的空间曲面的设计问题转变成简易的数学计算问题。
3.
The method in automatic computer aided programing and computer aided manufacturing of cylinder cams, which have been widely used in industry, mechanism, has been researched and utilized.
对轻工机械中常用的圆柱凸轮进行了计算机辅助编程与制造。
3) scoliosis
[英][,skəuli'əusis] [美][,skolɪ'osɪs]
脊柱侧凸
1.
Research advance in effectiveness of bracing for adolescent idiopathic scoliosis;
支具治疗青少年特发性脊柱侧凸有效性的研究进展
2.
The study of axis-line-distance technique in assessing the curative effect of scoliosis;
中轴线距离法在脊柱侧凸疗效评价中的应用
3.
Comparison of results between allograft and autograft for treatment of scoliosis in the adolescent;
同种异体骨与自体骨移植治疗青少年脊柱侧凸的比较研究
4) Kyphosis
[英][kai'fəusis] [美][kaɪ'fosɪs]
脊柱后凸
1.
Posterior short segment fixation with pedicle screws and bone grafting in the treatment of child congenital kyphosis;
后路短节段椎弓根内固定加植骨融合治疗儿童先天性脊柱后凸
2.
Cause analysis of loss of correction after spine osteotomy in kyphosis;
脊柱后凸全脊椎截骨术后矫正度丢失原因分析
3.
The application of spinal osteotomy in kyphosis;
脊柱截骨术在脊柱后凸畸形中应用
5) cylindrical cams
圆柱凸轮
1.
Under Solid Works environment,uses the VBA development kit,realizes the cylindrical cams 3D parameterization design method and the step.
介绍了Solid Works环境下,利用VBA开发工具,实现圆柱凸轮三维参数化设计的方法与步骤。
2.
The three dimensional CAD software of cylindrical cams is programmed based on the AUTOCAD software, and the NC program is created automatically based on the XK714/1 NC milling machine with this cylindrical cams CAD software, so the machining efficient of cylindrical cams are improved greatly .
本文基于AUTOCAD软件内嵌的VBA开发工具,开发了圆柱凸轮的三维CAD软件,该三维CAD软件实现了圆柱凸轮的三维参数化建模,并且基于四轴联动数控铣床XK714/1,自动生成了圆柱凸轮的数控程序,从而解决了圆柱凸轮数控编程困难的问题,大大提高了圆柱凸轮系列化产品的生产效率。
3.
The characters of contact lines on the rollers within four kinds of cylindrical cam mechanisms are analyzed first using the theory of conjugating surfaces and the conclusion got then that cylindrical cams′ contours are not torses in this paper.
针对圆柱凸轮的共轭加工方式，利用共轭曲面原理分析了４类圆柱凸轮机构的滚子接触线特性，得出了圆柱凸轮廓面是不可展曲面的结论。
6) cam-follower
凸轮挺柱
1.
On simulation of cam-follower wear model under circumstances of Matlab/Simulink;
基于Matlab/Simulink的内燃机凸轮挺柱磨损数值计算的仿真研究
补充资料：凸凸
1.高出貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条