1.
Computation Method of Elastohydrodynamic Lubricant Film Thickness Between Cam and Tappet of IC Engines
内燃机凸轮挺柱间油膜厚度的计算方法
2.
Numerical Simulation of Valve Cam-tappet Contact Stress
配气机构凸轮—挺柱接触应力的数值模拟
3.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
4.
A Numerical Analysis for Unsteady Elastohydrodynamic Lubrication Process of Engine Cam-Tappet Pair
内燃机凸轮—挺柱副非稳态弹流润滑过程的数值分析
5.
Contact Stress and Fatigue Wear Failure Analysis of Medium-sized CNG Engine Cam/Tappet;
中型CNG发动机凸轮/挺柱接触应力与疲劳磨损失效分析
6.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
7.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
8.
The Method of Checking Cylindrical Indexing Cam Contour with Cam Check Meter
用凸轮检测仪检测圆柱分度凸轮廓面的方法
9.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
10.
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
11.
Measurement & Error Analysis of Cylindrical Indexing Cam
圆柱分度凸轮廓面的测量及误差分析
12.
The Exploiture and Study of the System CAD/CAM of Cylindrical Cams;
圆柱凸轮CAD/CAM系统的研究与开发
13.
The Study of CAD/CAM/CNC for Swinging Driven Column Cam
摆动从动件圆柱凸轮CAD/CAM/CNC的研究
14.
NC programming of cam profile curves of constant flow pump by least squares
等流量柱塞泵凸轮轮廓的最小二乘法数控编程
15.
Cam profile curve design of cylindrical cam combined mechanism with straight moving -oscillating moving follower
直动-摆动从动件圆柱凸轮组合机构的凸轮廓线设计
16.
A projecting cam, as on a rotating shaft, that activates another machine part.
凸轮如转轴上突出的挺杆，使另一个机器零件活动
17.
A rod moved by a cam to operate the valves in an internal-combustion engine.
阀门挺杆通过凸轮转动的杆，用来操纵内燃机的阀门
18.
"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "
"在这种装置中,凸轮轴直接装在气门挺杆下,并且不必有推杆或摇臂。"