1.
Structure Analysis of a New End Closure for Pressure Vessels;
新型高压容器顶盖密封结构分析研究
2.
flat-top sealed can
带平顶盖的密封罐(润滑油用)
3.
a gasket to seal a cylinder head.
一种密封汽缸盖顶的垫圈。
4.
To coat, pack, or seal with lute.
用封泥盖、包或密封
5.
bellows seal bonnet
波纹管密封型上阀盖
6.
labyrinth gland
迂回[曲折, 迷宫式]密封盖
7.
The pit cover should be sealed over with tar paper or plastic.
顶盖必须用焦油纸或塑料封闭。
8.
Tripe-lips type: the metal shield with long triple rubber lips has considerable large torque and good sealing.
三唇密封形式，金属防尘盖上带有三重细长密封胶唇的严格密封，具有较大的按触密封扭矩。
9.
A crown for covering or sealing a tooth.
齿冠遮盖或密封牙齿的冠状物
10.
Bolted cover plate to protect seal and cylinder from the ingress of debris.
上盖板可防止杂物进入缸筒损坏密封。
11.
A hermetic seal is used on this glass bottle.
这个玻璃瓶用的是一种密封盖。
12.
a rubber seal in the lid of a jar
罐子盖儿里的橡皮密封圈
13.
To cover, protect, or seal with a cap.
加帽于用帽或塞来遮盖、保护或密封
14.
Finite Element Analysis on the Sealing Structure of the Bulkhead for a Columniform Dewar
柱形杜瓦瓶端盖密封结构有限元分析
15.
DEVELOPMENT FOR A DIRECTIONAL FRACTURE COMPOSITE SEALING COVER
一种定向断裂复合材料密封盖的研制
16.
The bottom bearing applies both labyrinth seal and frame seal, which have good performance of sealing. The main shaft is anticorrosive.
下轴承端盖密封采用双重密封，可确保密封效果，主轴采用防腐新技术，能保护主轴免受腐蚀。
17.
Trim or remove excess sealant film in the rear main cap oil pan gasket groovDO NOT remove the sealant inside the rear main cap slots.
修整或清除后主盖机油底壳垫圈凹槽中过多的密封剂薄膜。切勿清除在后主盖槽中的密封剂。
18.
The drive was arched over with thick foliage.
这条车道的上方由茂密的绿叶拱顶覆盖着。